JOURNAL PAPER

  1. W.L. Lai and C.S. Poon (2012), “Applications of Nondestructive Evaluation Techniques in Concrete Inspection”. HKIE Transactions, Vol. 19(4), pp. 34-41.
  2. S.C. Kou and C.S. Poon (2012), “Effect of Quality of Parent Concrete on the Mechanical Properties of High Performance Recycled Aggregate Concrete”. Journal of the Chinese Ceramic Society, No. 1, pp. 7.
  3. J.Z. Xiao, W.G. Li and C.S. Poon (2012), “Recent Studies on Mechanical Properties of Recycled Aggregate Concrete in China-A Review”. Science China-Technological Sciences, Vol. 55(6), pp. 1463-1480.
  4. J. Chen, S.C. Kou and C.S. Poon (2012), “Hydration and properties of nano-TiO2 blended cement composites”. Cement and Concrete Composites, Vol. 34(5), pp. 642–649.
  5. T.C. Ling, C.S. Poon, W.S. Lam, T.P. Chan and K.L. Fung (2012), “Utilization of Recycled Cathode Ray Tubes Glass in Cement Mortar for X-Ray Radiation-Shielding Applications”. Journal of Hazardous Materials, Vol. 199-200, pp. 321-327.
  6. T.C. Ling, C.S. Poon and S.C. Kou (2012), “Influence of Recycled Glass Content and Curing Conditions on the Properties of Self-Compacting Concrete after Exposure to Elevated Temperature”. Cement and Concrete Composites, Vol. 34(2), pp. 265-272.
  7. T.C. Ling and C.S. Poon (2012), “Feasible Use of Recycled CRT Funnel Glass as Heavyweight Fine Aggregate in Barite Concrete”. Journal of Cleaner Production, Vol. 33, pp. 42-49.
  8. T.C. Ling and C.S. Poon (2012), “Development of a Method for Recycling of CRT Funnel Glass”. Environmental Technology, Vol. 33(22), pp. 2531-2537. (Special Issue: Advanced Waste Treatment Technology).
  9. T.C. Ling and C.S. Poon (2012), “A Comparative Study on the Feasible Use of Recycled Beverage and CRT Funnel Glass as Fine Aggregates in Cement Mortar”. Journal of Cleaner Production, Vol. 29-30, pp. 46-52.
  10. W.L. Lai, K.K. Lee, S.C. Kou, C.S. Poon and W.F. Tsang (2012), “A Study of Full-Field Debond Behaviour and Durability of CFRP-Concrete Composite Beams by Pulsed Infrared Thermography (IRT)”. NDT&E International, Vol. 52, pp. 112-121.
  11. W.L. Lai, S.C. Kou and C.S. Poon (2012), “Unsaturated Zone Characterization in Soil through Transient Wetting and Drying Using GPR Joint Time-Frequency Analysis and Grayscale Images”. Journal of Hydrology, Vol. 452–453, pp. 1–13.
  12. S.C. Kou, B.J. Zhan and C.S. Poon (2012), “Properties of Partition Wall Blocks Prepared with Fresh Concrete Wastes”. Construction and Building Materials, Vol. 28(2), pp. 758-766.
  13. S.C. Kou, B.J. Zhan and C.S. Poon (2012), “Feasibility Study of Using Recycled Fresh Concrete Waste as Coarse Aggregates in Concrete”. Construction and Building Materials, Vol. 28(1), pp. 549-556.
  14. S.C. Kou, C.S. Poon and H.W. Wan (2012), “Properties of Concrete Prepared with Low-grade Recycled Aggregates”. Construction and Building Materials, Vol. 36, pp. 881-889.
  15. S.C. Kou and C.S. Poon (2012), “Enhancing Durability Properties of Concrete Prepared with Coarse Recycled Aggregate”. Construction and Building Materials, Vol. 35, pp. 69-76.
  16. M.Z. Guo, T.C. Ling and C.S. Poon (2012), “TiO2 Based Self-Compacting Glass Mortar: Comparison of Photocatalytic Nitrogen Oxide Removal and Bacteria Inactivation”. Building and Environment, Vol. 53, pp. 1-6.
  17. Barbudo, F. Agrela, J. Ayuso, J.R. Jimenez and C.S. Poon (2012), “Statistical Analysis of Recycled Aggregates Derived from Different Sources for Sub-Base Applications”. Construction and Building Materials, Vol. 28, pp. 129–138.
  18. Z. Xiao, T.C. Ling, S.C. Kou, Q.Y. Wang and C.S. Poon (2011), “Use of Wastes Derived from Earthquakes for the Production of Concrete Masonry Partition Wall Blocks”. Waste Management, Vol. 31(8), pp. 1859-1866.
  19. C.S. Poon, H. Zhao and S.C. Kou (2011), “Development Trend of Radiation Shielding Concrete”. Journal of Wuhan University of Technology, Vol. 33(1), pp. 45-51.
  20. T.C. Ling, C.S. Poon and S.C. Kou (2011), “Feasibility of Using Recycled Glass in Architectural Cement Mortar”. Cement and Concrete Composites, Vol. 33(8), pp. 848-854.
  21. T.C. Ling and C.S. Poon (2011), “Utilization of Recycled Glass Derived from Cathode Ray Tube Glass as Fine Aggregate in Cement Mortar”. Journal of Hazardous Materials, Vol. 192(2), pp. 451-456.
  22. T.C. Ling and C.S. Poon (2011), “Properties of Architectural Mortar Prepared with Recycled Glass with Different Particle Sizes”. Materials and Design, Vol. 32(5), pp. 2675-2684.
  23. G. Lee, T.C. Ling, Y.L. Wong and C.S. Poon (2011), “Effects of Crushed Glass Cullet Sizes, Casting Methods and Pozzolanic Materials on ASR of Concrete Blocks”. Construction and Building Materials, Vol. 25(5), pp. 2611-2618.
  24. P.T.I. Lam, E.H.W. Chan, C.K. Chau and C.S. Poon (2011), “A Sustainable Framework of Green Specification for Construction in Hong Kong”. Journal of Facilities Management, Vol. 9(1), pp. 16-33. 
  25. S.C. Kou, C.S. Poon and M. Etxeberria (2011), “Influence of Recycled Aggregates on Long Term Mechanical Properties and Pore Size Distribution of Concrete”. Cement and Concrete Composites, Vol. 33(2), pp. 286-291.
  26. S.C. Kou, C.S. Poon and F. Agrela (2011), “Comparisons of Natural and Recycled Aggregate Concretes Prepared with the Addition of Different Mineral Admixtures”. Cement and Concrete Composites, Vol. 33(8), pp. 788-795.
  27. S.C. Kou and C.S Poon (2011), “Properties of Cementitious Rendering Mortar Prepared with Three Different Kinds of Recycled Fine Aggregates”. Journal of Wuhan University of Technology, Vol. 26(4), pp. 68-74.
  28. J. Chen, S.C. Kou and C.S. Poon (2011), “Photocatalytic Cement-based Materials: Comparison of Nitrogen Oxides and Toluene Removal Potentials and Evaluation of Self-cleaning Performance”. Building and Environment, Vol. 46(9), pp. 1827-1833.
  29. C.S. Poon and T.C. Ling (2010), “Use of Recycled Glass in Architectural Mortar.” Journal of Wuhan University of Technology, Vol. 32(17), pp. 231-5.
  30. C.S. Poon and S.C. Kou (2010), “Properties of Cementitious Rendering Mortar Prepared with Recycled Fine Aggregates.” Journal of Wuhan University of Technology, Materials Science Edition, Vol. 25(6), pp. 1053-1056.
  31. P.T.I. Lam, E.H.W. Chan, C.K. Chau, C.S. Poon and K.P. Chun (2010), “Factors Affecting the Implementation of Green Specifications in Construction”. Journal of Environmental Management, Vol. 91(3), pp. 654-661.
  32. P.T.I. Lam, E.H.W. Chan, C.K. Chau, C.S. Poon and K.P. Chun (2010), “Environmental Management System vs. Green Specifications: How Do They Complement Each Other in the Construction Industry?”. Journal of Environmental Management, Vol. 92(3), pp. 788-795.
  33. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang and C.C. Lai (2010), “Characterization of the Deterioration of Externally Bonded CFRP-concrete Composites Using Quantitative Infrared Thermography”. Cement and Concrete Composites, Vol. 32(9), pp. 740-746.
  34. S.C. Kou and C.S. Poon (2010), “Properties of Concrete Prepared with PVA-impregnated Recycled Concrete Aggregates”. Cement and Concrete Composites, Vol. 32(8), pp. 649-654.
  35. L. Jaillon and C.S. Poon (2010), “Design Issues of Using Prefabrication in Hong Kong Building Construction”. Construction Management and Economics, Vol. 28(10), pp. 1025-1042.
  36. R.C.P. Yip and C.S. Poon (2009), “Cultural Shift towards Sustainability in the Construction Industry of Hong Kong”. Journal of Environmental Management, Vol. 90(11), pp. 3616-3628.
  37. X.C. Qiao, C.R. Cheeseman and C.S. Poon (2009), “Influences of Chemical Activators on Incinerator Bottom Ash”. Waste Management, Vol. 29(2), pp. 544-549.
  38. C.S. Poon, S.C. Kou, H.W. Wan and M. Etxeberria (2009), “Properties of Concrete Blocks Prepared with Low Grade Recycled Aggregates”. Waste Management, Vol. 29(8), pp. 2369-2377.
  39. M. Lu, S.C. Lau and C.S. Poon (2009), “Simulation Approach to Evaluating Cost Efficiency of Selective Demolition Practices: Case of Hong Kong’s Kai Tak Airport Demolition”. Journal of Construction Engineering and Management-ASCE, Vol. 135(6), pp. 448-457.
  40. P.T.I. Lam, E.H.W. Chan, C.K. Chau, C.S. Poon and K.P. Chun (2009), “Integrating Green Specifications in Construction and Overcoming Barriers in their Use”. Journal of Professional Issues in Engineering Education and Practice, ASCE, Vol. 135(4), pp. 142-152.
  41. W.L. Lai, S.C. Kou, W.F. Tsang and C.S. Poon (2009), “Characterization of Concrete Properties from Dielectric Properties Using Ground Penetrating Radar”. Cement and Concrete Research, Vol. 39(8), pp. 687-695.
  42. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang and C.C. Lai (2009), “Effects of Elevated Water Temperature on Interfacial Delaminations, Failure Modes and Shear Strength in Externally-Bonded CFRP-Concrete Beams Using Infrared Thermography, Gray-Scale Images and Direct Shear Test”. Construction and Building Materials, Vol. 23(10), pp. 3152-3160.
  43. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang, S.P. Ng and Y.Y. Hung (2009), “Characterization of Flaws Embedded in Externally Bonded CFRP on Concrete Beams by Infrared Thermography and Shearography”. Journal of Nondestructive Evaluation, Vol. 28, pp. 27–35.
  44. S.C. Kou and C.S. Poon (2009), “Properties of Self-Compacting Concrete Prepared with Coarse and Fine Recycled Concrete Aggregates”. Cement and Concrete Composites, Vol. 31(9), pp. 622-627.
  45. S.C. Kou and C.S. Poon (2009), “Properties of Self-Compacting Concrete Prepared with Recycled Glass Aggregate”. Cement and Concrete Composites, Vol. 31(2), pp. 107-113.
  46. S.C. Kou and C.S. Poon (2009), “Properties of Concrete Prepared with Crushed Fine Stone, Furnace Bottom Ash and Fine Recycled Aggregate as Fine Aggregates”. Construction and Building Materials, Vol. 23(8), pp. 2877-2886.
  47. S.C. Kou, G. Lee, C.S. Poon and W.L. Lai (2009), “Properties of Lightweight Aggregate Concrete Prepared with PVC Granules Derived from Scraped PVC Pipes”. Waste Management, Vol. 29(2), pp. 621-628.
  48. P.S. Ko and C.S. Poon (2009), “Domestic Waste Management and Recovery in Hong Kong”. Journal of Mater Cycles Waste Management, Vol. 11, pp. 104-109.
  49. L. Jaillon and C.S. Poon (2009), “The Evolution of Prefabricated Residential Building Systems in Hong Kong: A Review of the Public and the Private Sector”. Automation in Construction, Vol. 18(3), pp. 239-248.
  50. L. Jaillon, C.S. Poon and Y.H. Chiang (2009), “Quantifying the Waste Reduction Potential of Using Prefabrication in Building Construction in Hong Kong”. Waste Management, Vol. 29(1), pp. 309-320.
  51. J. Chen and C.S. Poon (2009), “Photocatalytic Construction and Building Materials: From Fundamentals to Applications”. Building and Environment, Vol. 44(9), pp. 1899-1906.
  52. J. Chen and C.S. Poon (2009), “Photocatalytic Activity of Titanium Dioxide Modified Concrete Materials – Influence of Utilizing Recycled Glass Cullets as Aggregates”. Journal of Environmental Management, Vol. 90(11), pp. 2436-3442.
  53. J. Chen and C.S. Poon (2009), “Photocatalytic Cementitious Materials: Influence of the Microstructure of Cement Paste on Photocatalytic Pollution Degradation”. Environmental Science & Technology, Vol. 43(23), pp. 8948-8952.
  54. Baldwin, C.S. Poon, L.Y. Shen, S. Austin and I. Wong (2009), “Designing out Waste in High-Rise Residential Buildings: Analysis of Precasting Methods and Traditional Construction”. Renewable Energy, Vol. 34(9), pp. 2067-2073.
  55. C.S. Poon and S.C. Kou (2009), “Research Progress of Concrete Using Recycled Aggregates in Hong Kong”. Journal of Qingdao Technological University, Vol. 30(4).
  56. C.S .Poon and S.C. Kou (2009), “Quality Control of Recycled Aggregates Derived from Construction and Demolition Wastes”. Journal of Sichuan University (Engineering Science Edition), Vol. 41(3).
  57. R. Yip and C.S. Poon (2008), “Comparison of Timber and Metal Formwork System”. Proceedings, ICE Waste and Resources Management, Vol. 161, pp. 29-36.
  58. X.C. Qiao, M. Tyrer, C.S. Poon and C.R. Cheeseman (2008), “Novel Cementitious Materials Produced from Incinerator Bottom Ash”. Resources, Conservation and Recycling, Vol. 52(3), pp. 496-510.
  59. X.C. Qiao, B.R. Ng, M. Tyrer, C.S. Poon and C.R. Cheeseman (2008), “Production of Lightweight Concrete Using Incinerator Bottom Ash”. Construction and Building Materials, Vol. 22(4), pp. 473-480.
  60. X.C. Qiao, M. Tyrer, C.S. Poon and C.R. Cheeseman (2008), “Characterisation of Alkali-Activated Thermally Treated Incinerator Bottom Ash”. Waste Management, Vol. 28(10), pp. 1955-1962. 
  61. C.S. Poon (2008), “Management of CRT Glass from Discarded Computer Monitors and TV Sets”. Waste Management, Vol. 28(9), pp. 1499.
  62. C.S. Lam and C.S. Poon (2008), “The Effect of Aggregates-to-Cement Ratio and Types of Aggregates on the Properties of Pre-Cast Concrete Blocks”. Cement and Concrete Composites, Vol. 30(4), pp. 283-289.
  63. S.C. Kou, C.S. Poon and L. Lam (2008), “The Effect of Recycled Aggregate Paving Blocks with Classified Fly Ash and Rejected Fly Ash with the Addition of Anhydrite and Flue Gas Desulphrisation Sludge (FGDS)”. Journal of Wuhan University of Technology, Vol. 23(3), pp. 68-74.
  64. S.C. Kou, C.S. Poon and D. Chan (2008), “Influence of Fly Ash as a Cement Addition on the Hardened Properties of Recycled Aggregate Concrete”. Materials and Structures, Vol. 41(7), pp. 1191-1201.
  65. S.C. Kou and C.S. Poon (2008), “Mechanical Properties of 5-year-old Concrete Prepared with Recycled Aggregates Obtained from Three Different Sources”. Magazine of Concrete Research, Vol. 60(1), pp. 57-64.
  66. L. Jaillon and C.S. Poon (2008), “Sustainable Construction Aspects of Using Prefabrication in Dense Urban Environment: A Hong Kong Case Study”. Construction Management and Economics, Vol. 26(9), pp. 953-966.
  67. A.N. Baldwin, L.Y. Shen, C.S. Poon, S.A. Austin and I. Wong (2008), “Modeling Design Information to Evaluate Pre-Fabricated and Pre-Cast Design Solutions for Reducing Construction Waste in High Rise Residential Buildings”. Automation in Construction, Vol. 17(3), pp. 333-341.
  68. X.C. Qiao, C.S. Poon and C.R. Cheeseman (2007), “Investigation into the Stabilization/Solidification Performance of Portland Cement through Cement Clinker Phases”. Journal of Hazardous Materials, Vol. 139(2), pp. 238-243.
  69. C.S. Poon, S.C. Kou and L. Lam (2007), “Influence of Recycled Aggregates on Slump and Bleeding of Fresh Concrete”. Material and Structures, Vol. 40(9), pp. 981-988.
  70. C.S. Poon and E. Cheung (2007), “NO Removal Efficiency of Photocatalytic Paving Blocks Prepared with Recycled Materials”. Construction and Building Materials, Vol. 21(8), pp. 1746-1753.
  71. C.S. Poon and D. Chan (2007), “The Use of Recycled Aggregates in Concrete in Hong Kong”. Resources, Conservation and Recycling, Vol. 50(3), pp. 293-305.
  72. C.S. Poon and D. Chan (2007), “Effects of Contaminants on the Properties of Concrete Paving Blocks Prepared with Recycled Concrete Aggregates”. Construction and Building Materials, Vol. 21(1), pp. 164-175.
  73. C.S. Poon (2007), “Reducing Construction Waste”. Waste Management, Vol. 27(12), pp. 1715-1716.
  74. C.S. Poon (2007), “Management of Construction and Demolition Waste”. Waste Management, Vol. 27(2), pp. 159-160.
  75. C.S. Lam, C.S. Poon and Dixon Chan (2007), “Enhancing the Performance of Pre-Cast Concrete Blocks by Incorporating Waste Glass – ASR Consideration”. Cement and Concrete Composites, Vol. 29(8), pp. 616-625.
  76. S.C. Kou, C.S. Poon and D. Chan (2007), “Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete”. Journal of Materials in Civil Engineering, Vol. 19(9), pp. 709-717.
  77. S.C. Kou and C.S. Poon (2007), “An Experimental Study on Hardened Properties of Steam Cured Recycled Aggregate Concrete Containing Class F Fly Ash”. Journal of Wuhan University of Technology, Vol. 22(2), pp. 101-108.
  78. Y.F. Fu, Y.L. Wong, C.S. Poon and C.A. Tang (2007), “Numerical Tests of Thermal Cracking Induced by Temperature Gradient in Cement-Based Composites under Thermal Loads”. Cement and Concrete Composites, Vol. 29(2), pp. 103-116.
  79. C.S .Poon and S.C. Kou (2007), “New Technology of Sustainable Utilization of Construction and Demolition Waste”. Journal of Wuhan University of Technology, Vol. 29(1), In Chinese.
  80. A.N. Baldwin, S.A. Austin, C.S. Poon, L.Y. Shen and I. Wong (2007), “Reducing Waste in High Rise Residential Buildings by Information Modeling at the Design Stage”. Surveying and Built Environment, Vol. 18(1), pp. 51-62.
  81. D. Chan and C.S. Poon (2006), “Effects of Fine Recycled Aggregate as Sand Replacement in Concrete”. HKIE Transactions, Vol. 13(4), pp. 2-6.
  82. C.S. Poon and E. Cheung (2006), “Performance of Photo-Catalytic Paving Blocks Made from Waste”. Proceedings of Institution of Civil Engineers, Waste and Resource Management, Vol. 159(4), pp. 165-172.
  83. Y.F. Fu, Y.L. Wong, C.S. Poon and C.A. Tang (2006), “Literature Review of Study on Mechanism of Explosive Spalling in Concrete at Elevated Temperature”. Journal of Building Materials, Vol. 9(3), pp. 323-329.
  84. D. Chan and C.S. Poon (2006), “Using Recycled Construction Waste as Aggregates for Paving Blocks”. Proceedings of Institution of Civil Engineers, Waste and Resource Management, Vol. 159(WR2), pp. 83-92.
  85. Y.L. Wong, Y.F. Fu, C.S. Poon and C.A. Tang (2006), “Spalling of Concrete Cover of Fibre-Reinforced Polymer Reinforced Concrete Under Thermal Loads”. Materials and Structures, Vol. 39, pp. 991-999.
  86. C.S. Poon, X.C. Qiao, Z.S. Lin and C.R. Chesseman (2006), “Feasibility of Using Reject Fly Ash in Cement Based Stabilization/Solidification Processes”. Environmental Engineering Science, Vol. 23(1), pp. 14-23.
  87. C.S. Poon, X.C. Qiao and D. Chan (2006), “The Cause and Influence of Self-Cementing Properties of Fine Recycled Concrete Aggregates on the Properties of Unbound Sub-Base”. Waste Management, Vol. 26(10), pp. 1166-1172.
  88. C.S. Poon, S.C. Kou and L. Lam (2006), “Compressive Strength, Chloride Diffusivity and Pore Structure of High Performance Metakaolin and Silica Fume Concrete”. Construction and Building Materials, Vol. 20(10), pp. 858-865.
  89. C.S. Poon, S.C. Kou and D. Chan (2006), “Influence of Steam Curing on Hardened Properties of Recycled Aggregate Concrete”. Magazine of Concrete Research, Vol. 58(5), pp. 289-299.
  90. C.S. Poon and D. Chan (2006), “Paving Blocks Made with Recycled Concrete Aggregate and Crushed Clay Brick”. Construction and Building Materials, Vol. 20(8), pp. 569-577.
  91. C.S. Poon and D. Chan (2006), “Feasible Use of Recycled Concrete Aggregates and Crushed Clay Brick as Unbound Road Sub-Base”. Construction and Building Materials, Vol. 20(8), pp. 578-585.
  92. X.C. Qiao, C.S. Poon and E. Cheung (2006), “Comparative Studies of Three Methods for Activating Rejected Fly Ash”. Advances in Cement Research, Vol. 18 (4), pp. 165-170.
  93. X.C. Qiao, C.S Poon and C. Cheeseman (2006), “Use of Flue Gas Desulphurisation (FGD) Waste and Rejected Fly Ash in Waste Stabilization/Solidification Systems”. Waste Management, Vol. 26(2), pp. 141-149.
  94. X.C. Qiao, C.S. Poon and C.R. Chessesman (2006), “Transfer Mechanism of Contaminants in Cement Based Stabilized/Solidified Wastes”. Journal of Hazardous Materials, Vol. 129(1-3), pp. 290-296.
  95. M. Lu, C.S. Poon and L.C. Wong (2006), “Application Framework for Mapping and Simulation of Waste Handling Processes in Construction”. ASCE, Journal of Construction Engineering and Management, pp. 1212-1221.
  96. S.C. Kou and C.S. Poon (2006), “Compressive Strength, Pore Size Distribution and Chloride-ion Penetration of Recycled Aggregate Concrete Incorporating Class F Fly Ash”. Journal of Wuhan University of Technology, Vol. 21(4), pp. 130-136.
  97. S.C. Kou, C.S. Poon and L. Lam (2006), “The Effect of Recycled Aggregate Paving Blocks with Classified Fly Ash and Rejected Fly Ash the Addition of Anhydrite and Flue Gas Desulphrisation Sludge (FGDS)”. Journal of Wuhan University of Technology.
  98. C.S. Poon (2005), “Effective Management of Municipal Solid Waste”. Waste Management, Vol. 25(8), pp. 767.
  99. Y.F. Fu, Y.L. Wong, C.S. Poon and C.A. Tang (2005), “Stress-Strain Behaviour of High Strength Concrete at Elevated Temperature”. Magazine of Concrete Research, Vol. 57(9), pp. 535-554.
  100. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S .Poon (2005), “Leaching Behaviors of Heavy Metals in the Solidification/Stabilization Matrix Contained Rejected Fly Ash Blended and Cement”. Journal of Wuhan University of Technology, Vol. 27(10), In Chinese.
  101. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S .Poon (2005), “Study of Solidification and Stabilization of Heavy Metals Using Rejected Fly Ash Blended Cement Pastes”. Journal of Wuhan University of Technology, Vol. 27(3), In Chinese.
  102. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S .Poon (2004), “Chemical Activation of Rejected Fly Ash Using Alkali Sulphate”. Journal of Wuhan University of Technology, Vol. 26(6), In Chinese.
  103. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S. Poon (2004), “Influence of Chemical Activators on the Pozzolanic Properties of Rejected Fly Ash Blended and Cement”. Journal of Wuhan University of Technology, Vol. 26(4), In Chinese.
  104. R.C.K. Wong, J.E. Gillott, S. Law, M.J. Thomas and C.S. Poon (2004), “Calcined Oil Sands Fine Tailings as a Supplementary Cementing Material for Concrete”. Cement and Concrete Research, Vol. 34(7), pp. 1235-1242.
  105. C.S. Poon, Z.H. Shui and L. Lam (2004), “Compressive Behavior of Fiber Reinforced High-Performance Concrete Subjected to Elevated Temperatures”. Cement and Concrete Research, Vol. 34(12), pp. 2215-2222.
  106. C.S. Poon and D.W.S. Ho (2004), “A Feasibility Study on the Utilization of r-FA in SCC”. Cement and Concrete Research, Vol. 34(12), pp. 2337-2339.
  107. C.S. Poon, A.T.W. Yu, S.C. See and E. Cheung (2004), “Minimizing Demolition Wastes in Hong Kong Public Housing Projects”. Construction Management and Economics, Vol. 22, pp. 799-805.
  108. C.S. Poon, T.W. Yu, S.W. Wong and E. Cheung (2004), “Management of Construction Waste in Public Housing Projects in Hong Kong”. Construction Management and Economics, Vol. 22, pp. 675-689.
  109. C.S. Poon, X.C. Qiao and Z.S. Lin (2004), “Effect of Flue Gas Desulphurization Sludge on the Pozzolanic Reaction of Reject-Fly-Ash-Blended Cement Pastes”. Cement and Concrete Research, Vol. 34(10), pp. 1907-1918.
  110. C.S. Poon, A.T.W. Yu and L. Jaillon (2004), “Reducing Building Waste at Construction Sites in Hong Kong”. Construction Management and Economics, Vol. 22, pp. 461-470.
  111. C.S. Poon, Z.H. Shui, and L. Lam (2004), “Effect of Microstructure of ITZ on Compressive Strength of Concrete Prepared With Recycled Aggregates”. Construction and Building Materials, Vol. 18(6), pp. 461-468.
  112. C.S. Poon, Z.H. Shui, L. Lam, H. Fok and S.C. Kou (2004), “Influence of Moisture States of Natural and Recycled Aggregates on the Slump and Compressive Strength of Concrete”. Cement and Concrete Research, Vol. 34(1), pp. 31-36.
  113. Y.F. Fu, Y.L. Wong, C.S. Poon, C.A. Tang and P. Lin (2004), “Experimental Study of Micro/Macro Crack Development and Stress-Strain Relations of Cement-Based Composite Materials at Elevated Temperatures”. Cement and Concrete Research, Vol. 34(5), pp. 789-797.
  114. Y.F. Fu, Y.L. Wong, C.A. Tang, C.S. Poon (2004), “Thermal Induced Stress and Associated Cracking in Cement-based Composite at Elevated Temperature – Part II: Thermal Cracking around Multiple Inclusions”. Cement and Concrete Composites, Vol. 26(2), pp. 113-126.
  115. Y.F. Fu, Y.L. Wong, C.A. Tang, C.S. Poon (2004), “Thermal Induced Stress and Associated Cracking in Cement-based Composite at Elevated Temperature – Part I: Thermal Cracking around Single Inclusion”. Cement and Concrete Composites, Vol. 26(2), pp. 99-111.
  116. Y. Xu, Y.L. Wong, C.S. Poon and M. Anson (2003), “Influence of PFA on Cracking of Concrete and Cement Paste after Exposure to High Temperatures”. Cement and Concrete Research, Vol. 33(12), pp. 2009-2016.
  117. X.C. Qiao, C.S. Poon and Z.S. Lin (2003), “Activation of Rejected Fly Ash Using Flue Gas Desulphurization (FGD) Sludge”. Journal of Wuhan University of Technology-Materials Science Edition, Vol. 18(4), pp. 84-88.
  118. C.S. Poon, X. Qiao and Z.S. Lin (2003), “Pozzolanic Properties of Reject Fly Ash in Blended Cement Pastes”. Cement and Concrete Research, Vol. 33(11), pp. 1857-1865.
  119. C.S. Poon, Ann T.W. Yu and L.H. Ng (2003), “Comparison of Low-Waste Building Technologies Adopted in Public and Private Housing Projects in Hong Kong”. Engineering, Construction and Architectural Management, Vol. 10(2), pp. 88-98.
  120. C.S. Poon, S. Azhar, M. Anson and Y.L. Wong (2003), “Performance of Metakaolin Concrete at Elevated Temperatures”. Cement and Concrete Composites Vol. 25(1), pp. 83-89.
  121. C.S. Poon and S. Azhar (2003), “Deterioration and Recovery of Metakaolin Blended Concrete Subjected to High Temperature”. Fire Technology, Vol. 39(1), pp. 23-34.
  122. C.S. Poon (2003), “Editorial”. Waste Management, Vol. 23(4), pp. iii.
  123. X.D. Li, C.S. Poon, S.C. Lee, S.S. Chung and F. Luk (2003), “Waste Reduction and Recycling Strategies for the In-Flight Services in the Airline Industry”. Resources, Conservation and Recycling, Vol. 37(2), pp. 87-99.
  124. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S. Poon (2003), “Preliminary Study on the Pozzolanic Properties of Rejected Fly Ash”. Journal of Wuhan University of Technology, Vol. 25(8), In Chinese.
  125. C.S. Poon and L. Jaillon (2002), “Minimizing Construction and Demolition Waste at the Design Stage”. The Official Journal of the Hong Kong Institute of Architects, Issue No. 33/3rd Quarter, pp. 50-55.
  126. S.S. Chung, C.W.H. Lo and C.S. Poon (2002), “Factors Affecting Waste Disposal Facilities Siting in Southern China”. Journal of Environmental Assessment Policy and Management, Vol. 4(2), pp. 241-262.
  127. C.S. Poon, S.C. Kou and L. Lam (2002), “Use of Recycled Aggregates in Molded Concrete Bricks and Blocks”. Construction and Building Materials, Vol. 16(5), pp. 281-289.
  128. C.S. Poon, S.C. Kou and L. Lam (2002), “Pore Size Distribution of High Performance Metakaolin Concrete”. Journal of Wuhan University of Technology, Materials Science Edition, Vol. 17(1), pp. 42-46.
  129. Y. Xu, Y.L. Wong, C.S.  Poon and M. Anson (2001), “Impact of High Temperature on PFA Concrete”. Cement and Concrete Research, Vol. 31(7), pp. 1065-1073.
  130. X.D. Li, Y. M. Zhang, C.S. Poon and I.M.C. Lo (2001), “Study of Zinc in Cementitious Material Stabilised/Solidified Wastes by Sequential Chemical Extraction and Microstructural Analysis”. Chemical Speciation and Bioavailability, Vol. 13, pp. 1-7.
  131. C.S Poon, S. Azhar, M. Anson and Y.L. Wong (2001), “Strength and Durability Recovery of Fire-Damaged Concrete after Post-Fire Curing”. Cement and Concrete Research, Vol. 31(9), pp. 1307-1318.
  132. C.S. Poon, S. Azhar, M. Anson and Y.L. Wong (2001), “Comparison of the Strength and Durability Performance of Normal- and High-Strength Pozzolanic Concretes at Elevated Temperatures”. Cement and Concrete Research, Vol. 31(9), pp. 1291-1300.
  133. C.S. Poon, L. Lam, S.C. Kou, Y.L. Wong and R. Wong (2001), “Rate of Pozzolanic Reaction of Metakaolin in High-Performance Cement Pastes”. Cement and Concrete Research, Vol. 31(9), pp. 1301-1306.
  134. C.S. Poon, S.C. Kou, L. Lam and Z.S. Lin (2001), “Activation of Fly Ash/Cement Systems Using Calcium Sulfate Anhydrite CaSO4”. Cement and Concrete Research, Vol. 31(6), pp. 873-881.
  135. C.S. Poon, Ann T.W. Yu and L.H. Ng (2001), “On-Site Sorting of Construction and Demolition Waste in Hong Kong”. Resources, Conservation and Recycling, Vol. 32(2), pp. 157-172.
  136. C.S. Poon, K.W. Lio and C.I. Tang (2001), “A Systematic Study on Cement/PFA Chemical Stabilization/Solidification Process for the Treatment of Heavy Metal Waste”, Waste Management and Research, Vol. 19(4), pp. 276-283.
  137. C.S. Poon, Z.Q. Chen and O. Wai (2001), “The Effect of Flow-Through Leaching on the Diffusivity of Heavy metals in Stabilized/Solidified Wastes”. Journal of Hazardous Materials, Vol. 81(1-2), pp. 179-192.
  138. I.M.L. Lo, C.I. Tang, X.D. Li and C.S. Poon (2001), “Leaching and Microstructural Analysis of Cement-Based Solidified Wastes: Response to comments”. Environmental Science & Technology, Vol. 35 (21), pp. 4395-4395.
  139. X.D. Li, C.S. Poon, H. Sun, I.M.C. Lo and D.W. Kirk (2001), “Heavy Metal Specifications and Leaching Behaviours in Cement Based Solidified/Stabilised Waste Materials”. Journal of Hazardous Materials, Vol. 82(3), pp. 215-230.
  140. X.D. Li, C.S. Poon and P.S. Liu (2001), “Heavy Metal Contamination of Urban Soils and Street Dust in Hong Kong”. Applied Geochemistry, Vol. 16(11-12), pp. 1361-1368.
  141. S.S. Chung and C.S. Poon (2001), “Characterisation of Municipal Solid Waste and its Recyclable Contents of Guangzhou”. Waste Management and Research, Vol. 19, pp. 473-485.
  142. S.S. Chung and C.S. Poon (2001), “A Comparison of Waste Reduction Practices and New Environmental Paradigm of Rural and Urban Chinese Citizens”. Journal of Environmental Management, Vol. 62(1), pp. 3-19.
  143. S.S. Chung and C.S. Poon (2001), “Accounting for the Shortage of Solid Waste Disposal Facilities in Southern China”. Environmental Conservation, Vol. 28(2), pp. 93-103.
  144. C.S. Poon, L. Lam and Y.L. Wong (2000), “A Study on High Strength Concrete Prepared with Large Volumes of Low Calcium Fly Ash”. Cement and Concrete Research Vol. 30(3), pp. 447-455.
  145. I.M.L. Lo, C.I. Tang, X.D. Li and C.S. Poon (2000), “Leaching and Microstructural Analysis of Cement-Based Solidified Wastes”. Environmental Science & Technology, Vol. 34, pp. 5038- 5042.
  146. L. Lam, Y.L. Wong and C.S. Poon (2000), “Degree of Hydration and Gel/Space Ratio of High-Volume Fly Ash/Cement Systems”. Cement and Concrete Research, Vol. 30(5), pp. 747-756.
  147. S.S. Chung and C.S. Poon (2000), “A Comparison of Waste Reduction Practices and the New Environmental Paradigm in Four Southern Chinese Areas”. Environmental Management, Vol. 26(2), pp. 195-206.
  148. Y.L. Wong, L. Lam, C.S. Poon and F.P. Zhou (1999), “Properties of Fly Ash-Modified Cement Mortar-Aggregate Interfaces”. Cement and Concrete Research, Vol. 29(12), pp. 1905-1913.
  149. C.S. Poon, L. Lam and Y.L. Wong (1999), “Effects of Fly Ash and Silica Fume on Interfacial Porosity of Concrete”. Journal of Materials in Civil Engineering, ASCE. Vol. 11(3), pp. 197-205.
  150. C.S. Poon, L. Lam, S.C. Kou and Z.S. Lin (1999), “A Study on the Hydration Rate of Natural Zeolite Blended Cement Pastes”. Construction and Building Materials, Vol. 13(8), pp. 427-432.
  151. C.S. Poon and C.W. Chu (1999), “Planting Grass on Stabilized Chemically Assisted Precipitated Sewage Sludge”. Journal of Toxicological and Environmental Chemistry, Vol. 72, pp. 159-170.
  152. C.S. Poon and C.W. Chu (1999), “The Use of Ferric Chloride and Anionic Polymer in the Chemically Assisted Primary Sedimentation Process”. Chemosphere, Vol. 39(10), pp. 1773-1582.
  153. C.S. Poon, Z.Q. Chen and O. Wai (1999), “A Flow-through Leaching Model for Monolithic Chemically Stabilised/Solidified Hazardous Waste”. Journal of the Air and Waste Management Association, Vol. 49, pp. 569-575.
  154. C.S. Poon and Z.Q. Chen (1999), “Comparison of the Characteristics of Flow-Through and Flow-Around Leaching Tests of Solidified Heavy Metal Wastes”. Chemosphere, Vol. 38(3), pp. 663-680.
  155. S.C. Lee, C.S. Poon, X.D. Li and F. Luk (1999), “Indoor Air Quality Investigation on Commercial Aircraft”. Indoor Air, Vol. 9, pp. 180-187.
  156. P.C. Fung, Q. Huang, S.M. Tsui and C.S. Poon (1999), “Treatability Study of Organic and Colour Removal in Desizing/Dyeing Wastewater by UV/US system Combined with Hydrogen Peroxide”. Water Science and Technology, Vol. 40(1), pp. 153-160.
  157. S.S. Chung and C.S. Poon (1999), “The Attitudes of Guangzhou Citizens on Waste Reduction and Environmental Issues”. Resources, Conservation and Recycling, Vol. 25(1), pp. 35-59.
  158. C.W. Chu and C.S. Poon (1999), “The Feasibility of Planting on Stabilized Sludge-Amended Soil”. Environment International, Vol. 25(4), pp. 465-477.
  159. C.S. Poon, Q. Huang and P.C. Fung (1999), “Degradation Kinetics of Cuprophenyl Yellow RL by UV/H2O2/US Process in Aqueous Solution”. Chemosphere, Vol. 38(5), pp. 1005-1014.
  160. C.S. Poon (1998), “The Influence of Admixtures on the Microstructure and Water Stability of Macro-Defect Free Cement”. Journal of Materials Science Letters, Vol. 17(18), pp. 1593-1595.
  161. S.S. Chung and C.S. Poon (1998), “The Waste Paper and Plastic Recovery Industry of Hong Kong and the Waste Reduction Framework Plan”. Journal of Business and Information System, Vol. 3(1), pp. 137-152.
  162. L. Lam, Y.L. Wong and C.S. Poon (1998), “Effect of Fly Ash and Silica Fume on Compressive and Fracture Behaviors of Concrete”. Cement and Concrete Research, Vol. 28(2), pp. 271-283.
  163. S.S. Chung and C.S. Poon (1998), “Recovery Systems in Guangzhou and Hong Kong”. Resources, Conservation and Recycling, Vol. 23(1-2), pp. 29-45.
  164. S.S. Chung and C.S. Poon (1998), “A Comparison of Waste Management in Guangzhou and Hong Kong”. Resources, Conservation and Recycling, Vol. 22(3-4), pp. 203-216.
  165. C.W. Chu, C.S. Poon and R. Cheung (1998), “Characterization of Raw Sludge, Chemically Modified Sludge and Anaerobically Digested Sludge in Hong Kong”. Water Science and Technology, Vol. 38, pp. 25-32.
  166. M. Boost and C.S. Poon (1998), “The Effect of a Modified Method of Lime-Stabilisation Sewage Treatment on Enteric Pathogens”. Environment International, Vol. 24(7), pp. 783-788. A
  167. C.S. Poon, Y.L. Wong and L. Lam (1997), “The Influence of Different Curing Conditions on the Pore Structure and Related Properties of Fly-Ash Cement Pastes and Mortars”. Construction and Building Materials, Vol. 11(7-8), pp. 383-393.
  168. C.S. Poon and K.W. Lio (1997), “The Limitation of the Toxicity Characteristics Leaching Procedure for Evaluating Cement-Based Stabilised/Solidified Waste Forms”. Waste Management, Vol. 17 (1), pp. 15-23.
  169. C.S. Poon (1997), “Management and Recycling of Demolition Waste in Hong Kong”. Waste Management and Research, Vol. 15(6), pp. 561-572.
  170. S.S. Chung and C.S. Poon (1997), “Quantifying Externalities in Solid Waste Management in Hong Kong”. Journal of Environmental Engineering, ASCE, Vol. 123(3), pp. 282-289.
  171. L.Y. Chan, Y. Qin, S.S. Chung and C.S. Poon (1997), “A Comparison of the Municipal Refuse Compositions and Management Policy in Hong Kong, Guangzhou, Foshan and Beijing”. Environmental Science (in Chinese), Vol. 18(2), pp. 58-61.
  172. C.S. Poon, C.M. Cheung and Y.Q. Xu (1996), “Building Waste Minimisation in Hong Kong Construction Industry”. Journal of Solid Waste Technology and Management, Vol. 23(2), pp. 111-117.
  173. S.S. Chung, C.S. Poon and L.S. Ho (1996), “How Can Waste Recycling and Waste Minimization be Fitted into Hong Kong’s Waste Management System?”. Transactions of Hong Kong Institution of Engineers, Vol. 3(1), pp. 9-16.
  174. C.S. Poon and M. Boost (1996), “The Stabilisation of Sewage Sludge by Pulverized Fuel Ash and Related Materials”. Environmental International, Vol. 22(6), pp. 705-710.
  175. S.S. Chung and C.S. Poon (1996), “The Attitudinal Differences in Source Separation and Waste Reduction between the General Public and Housewives in Hong Kong”. Journal of Environmental Management, Vol. 48(3), pp. 215-227.
  176. S.S. Chung and C.S. Poon (1996), “Evaluating Waste Management Alternatives by the Multiple Criteria Approach”. Resources, Conservation and Recycling, Vol. 17(3), pp. 189-210.
  177. S.S. Chung and C.S. Poon (1994), “An Analysis of Waste Recycling Policy in Hong Kong”. Asia Engineers, pp. 20-24.
  178. S.S. Chung and C.S. Poon (1994), “Recycling Behaviour and Attitude: the Case of Hong Kong People on Commercial and Household Wastes”. International Journal of Sustainable Development and World Ecology, Vol. 1, pp. 130-145.
  179. S.S. Chung and C.S. Poon (1994), “Hong Kong Citizens’ Attitude Towards Waste Recycling and Waste Minimization Measures”. Resources, Conservation and Recycling, Vol. 10(4), pp. 377-400.
  180. S.S. Chung and C.S. Poon (1994), “Waste Recycling Policy in Hong Kong”. Waste Management and Research, Vol. 12(1), pp. 21-32.
  181. C.S. Poon and G.R. Baldwin (1989), “The Influence of Weather on the Corrosion of Steel Reinforcement in Hong Kong”.  Structural Survey, Vol. 8(2), pp. 169-176.
  182. C.S. Poon and G.R. Baldwin (1989), “Corrosion of Steel in Concrete – A Basic Understanding and Research Needs in Hong Kong”.  Hong Kong Engineers, pp. 22-28.
  183. C.S. Poon and G.W. Groves (1988), “Tem Observation of a High-Alumina Cement Paste”.  Journal of Material Science Letters, Vol. 7, pp. 243-244.
  184. C.S. Poon and G.W. Groves (1988), “The Microstructure of Macrodefect Free Cement with Different Polymer Content and the Effect on Water Stability”. Journal of Material Science, Vol. 23, pp. 657-660.
  185. C.S. Poon, L.E. Wassell and G.W. Groves (1987), “Stability of Macro Defect Free Cement”.  Material Science and Technology, Vol. 3, pp. 993-996.
  186. C.S. Poon and G.W. Groves (1987), “The Effect of Latexes on Macro Defect Free Cement”.  Journal of Material Science, Vol. 22, pp. 2148-2152.
  187. C.S. Poon, L.E. Wassell and G.W. Groves (1987), “High Strength Refractory Aluminous Cement”.  Journal of British Ceramic Society, Vol. 86, pp. 58-62.
  188. C.S. Poon, A.I. Clark and R. Perry (1986), “Atomic Structure Analysis of Stabilised Toxic Waste”.  Environmental Technology Letters, Vol. 6, pp. 461-468.
  189. C.S. Poon, A.I. Clark, R. Perry, A.P. Barker and P. Barnes (1986), “Permeability Study on the Cement Based Solidification Process for the Disposal of Hazardous Waste”.  Cement and Concrete Research, Vol. 16(2), pp. 161-172.
  190. C.S. Poon, C.J. Peters, R. Perry, A.P. Barker and P. Barnes (1985), “Mechanisms of Metal Stabilization by Cement Based Fixation Processes”. Science of the Total Environment, Vol. 41(1), pp. 55-71.
  191. C.S. Poon, A.I. Clark, C.J. Peters and R. Perry (1985), “Mechanisms of Metal Fixation and Leaching by Cement Based Fixation Processes”.  Waste Manaagement and Research, Vol. 3(2), pp. 127-142.
  192. C.S. Poon, A.I. Clark and R. Perry (1985), “Investigation of the Physical Properties of Cement Based Fixation Process for the Disposal of Toxic Waste”.  Public Health Engineers, Vol. 13, pp. 108-111.
  193. C.S. Poon, C.J. Peters, R. Perry and C.P.V. Knight (1984), “Assessing the Leaching Characteristics of Stabilised Toxic Waste by Use of Thin Layer Chromatography”.  Environmental Technology Letters, Vol. 5(1), pp. 1-6.
  194. C. S. Poon, C.J. Peters and R. Perry (1983), “Use of Stabilisation Processes in the Control of Toxic Waste”.  Effluent and Water Treatment Journal, Vol. 23(11), pp. 451-459.a