JOURNAL PAPER

  1. Guo Ming Zhi, Li Jiang Shan, Poon Chi Sun (2019). Improved photocatalytic nitrogen oxides removal using recycled glass-nano-TiO2 composites with NaOH pre-treatment. Journal of Cleaner Production, 209: 1095-1104.
  2. He Ping Ping, Md Uzzal Hossain, Poon Chi Sun, Daniel CW Tsang. (2019). Mechanical, durability and environmental aspects of magnesium oxychloride cement boards incorporating waste wood. Journal of Cleaner Production, 207: 391-399.
  3. Xuan D.X., Tang P. and Poon C.S. (2019). MSWIBA-based cellular alkali-activated concrete incorporating waste glass powder. Cement and Concrete Composites, 95: 128-136.
  4. Xuan D.X., Tang P. and Poon C.S. (2018). Limitations and quality upgrading techniques for utilization of MSW incineration bottom ash in engineering applications—A review. Construction and Building Materials, 190: 1091-1102.
  5. Xuan Dong Xing, Poon Chi Sun, Zheng Wei. (2018). Management and sustainable utilization of processing wastes from ready-mixed concrete plants in construction: A review. Resources Conservation and Recycling, 136, pp: 238-247.
  6. Guo M. Z., Tu Z. J., Poon C. S., Shi C. J. (2018). Improvement of properties of architectural mortars prepared with 100% recycled glass by CO2 curing. Construction and Building Materials, 179, pp. 138-150.
  7. Hossain M. U., Poon C.S. (2018). Global warming potential and energy consumption of temporary works in building construction: A case study in Hong Kong. Building and Environment, 142, pp. 171-179.
  8. Chen Z., Li J.S., Zhan B. J., Poon C. S. (2018). Compressive strength and microstructural properties of dry-mixed geopolymer pastes synthesized from GGBS and sewage sludge ash. Construction and Building Materials, 182, pp. 597-607.
  9. Xiong Xinni, Yu Iris K.M., Chen Season S., Tsang Daniel C.W., Cao Leichang, Song Hocheol, Kwon Eilhann E., Ok Yong Sik, Zhang Shicheng, Poon  Chi Sun. (2018). Sulfonated biochar as acid catalyst for sugar hydrolysis and dehydration. Catalysis Today, 314, pp: 52-61.
  10. Zhong, R., Leng, Z., Poon, C.-S. (2018). Research and application of pervious concrete as a sustainable pavement material: A state-of-the-art and state-of-the-practice review. Construction and Building Materials, 183, pp. 544-553
  11. Yu K. Q., Dai J. G., Lu Z. D., Poon C. S. (2018). Rate-dependent tensile properties of ultra-high performance engineered cementitious composites (UHP-ECC). Cement and Concrete Composites, 93, pp. 218-234.
  12. Zhu W., Dai J.G., Poon C. S. (2018). Prediction of the bond strength between non-uniformly corroded steel reinforcement and deteriorated concrete. Construction and Building Materials, 187, pp. 1267-1276.
  13. Zhan Baojian, Xuan Dongxing, Poon Chisun, Shi Caijun, Kou Shicong. (2018) Characterization of C–S–H formed in coupled CO2–water cured Portland cement pastes. Materials and Structures, 51: 92.
  14. Wang, L., Iris, K., Tsang, D.C., Yu, K., Li, S., Poon, C.S., Dai, J.-G. (2018). Upcycling wood waste into fibre-reinforced magnesium phosphate cement particleboards, Construction and Building Materials, 159, 54-63.
  15. Iris, K., Tsang, D.C., Yip, A.C., Hunt, A.J., Sherwood, J., Shang, J., Song, H., Ok, Y.S., Poon, C.S. (2018). Propylene carbonate and γ-valerolactone as green solvents enhance Sn (iv)-catalysed hydroxymethylfurfural (HMF) production from bread waste, Green Chemistry, 20, 2064-74.
  16. Le Fang, Jiang-shan. Li, Shane Donatello, C.R. Cheeseman, Qiming Wang, Chi Sun Poon, Daniel C.W. Tsang, (2018). Recovery of phosphorus from incinerated sewage sludge ash by combined two-step extraction and selective precipitation, Chemical Engineering Journal, 348, pp. 74-83.
  17. Xuan, D., Zhan, B., Poon, C.S. (2018). Thermal and residual mechanical profile of recycled aggregate concrete prepared with carbonated concrete aggregates after exposure to elevated temperatures, Fire and Materials, 42,134-142.
  18. Zhang, B., Poon, C.S. (2018). Sound insulation properties of rubberized lightweight aggregate concrete, Journal of Cleaner Production, 172, 3176-85.
  19. Xuan, D., Zhan, B., Poon, C.S. (2018). A maturity approach to estimate compressive strength development of CO2-cured concrete blocks, Cement and Concrete Composites, 85, 153-60.
  20. Wang, Y.-S., Dai, J.-G., Wang, L., Tsang, D.C.W., Poon, C.S. (2018). Influence of lead on stabilization/solidification by ordinary Portland cement and magnesium phosphate cement, Chemosphere, 190, 90-6.
  21. Ling, T.-C., Kaliyavaradhan, S.K., Poon, C.S. (2018). Global perspective on application of controlled low-strength material (CLSM) for trench backfilling – An overview, Construction and Building Materials, 158, 535-48.
  22. Chen, S.S., Wang, L., Yu, I.K.M., Tsang, D.C.W., Hunt, A.J., Jérôme, F., Zhang, S., Ok, Y.S., Poon, C.S. (2018). Valorization of lignocellulosic fibres of paper waste into levulinic acid using solid and aqueous Brønsted acid, Bioresource Technology, 247, 387-94.
  23. Zheng, H., Dai, J.-G., Poon, C.S., Li, W. (2018). Influence of calcium ion in concrete pore solution on the passivation of galvanized steel bars, Cement and Concrete Research, 108, 46-58.
  24. Zheng, H., Dai, J.-G., Li, W., Poon, C.S. (2018). Influence of chloride ion on depassivation of passive film on galvanized steel bars in concrete pore solution, Construction and Building Materials, 166, 572-80.
  25. Zhan, B.J., Xuan, D.X., Poon, C.S. (2018). Enhancement of recycled aggregate properties by accelerated CO2 curing coupled with limewater soaking process, Cement and Concrete Composites, 89, 230-7.
  26. Yang, S., Cui, H., Poon, C.S. (2018). Assessment of in-situ alkali-silica reaction (ASR) development of glass aggregate concrete prepared with dry-mix and conventional wet-mix methods by X-ray computed micro-tomography, Cement and Concrete Composites, 90, 266-76.
  27. Yan, R., Yang, S., Guo, M.-Z., Poon, C.s. (2018). Comparative evaluation of fire resistance of partition wall blocks prepared with waste materials, Journal of Cleaner Production, 182, 156-65.
  28. Xuan, D., Tang, P., Poon, C.S. (2018). Effect of casting methods and SCMs on properties of mortars prepared with fine MSW incineration bottom ash, Construction and Building Materials, 167, 890-8.
  29. Xuan, D., Poon, C.S. (2018). Removal of metallic Al and Al/Zn alloys in MSWI bottom ash by alkaline treatment, Journal of Hazardous Materials, 344, 73-80.
  30. Wang, Q., Li, J.-S., Tang, P., Fang, L., Poon, C.S. (2018). Sustainable reclamation of phosphorus from incinerated sewage sludge ash as value-added struvite by chemical extraction, purification and crystallization, Journal of Cleaner Production, 181, 717-25.
  31. Wang, L., Zou, F., Fang, X., Tsang, D.C.W., Poon, C.S., Leng, Z., Baek, K. (2018). A novel type of controlled low strength material derived from alum sludge and green materials, Construction and Building Materials, 165, 792-800.
  32. Wang, L., Chen, L., Tsang, D.C.W., Li, J.-S., Yeung, T.L.Y., Ding, S., Poon, C.S. (2018). Green remediation of contaminated sediment by stabilization/solidification with industrial by-products and CO2 utilization, Science of The Total Environment, 631-632, 1321-7.
  33. Lu, J.-X., Poon, C.S. (2018). Use of waste glass in alkali activated cement mortar, Construction and Building Materials, 160, 399-407.
  34. Lu, J.-X., Poon, C.S. (2018). Improvement of early-age properties for glass-cement mortar by adding nanosilica, Cement and Concrete Composites, 89, 18-30.
  35. Li, L., Xiao, J., Xuan, D., Poon, C.S. (2018). Effect of carbonation of modeled recycled coarse aggregate on the mechanical properties of modeled recycled aggregate concrete, Cement and Concrete Composites, 89, 169-80.
  36. Li, J.-S., Wang, L., Cui, J.-L., Poon, C.S., Beiyuan, J., Tsang, D.C.W., Li, X.-D. (2018). Effects of low-alkalinity binders on stabilization/solidification of geogenic As-containing soils: Spectroscopic investigation and leaching tests, Science of The Total Environment, 631-632, 1486-94.
  37. Leung, Y.F., Liu, W., Li, J.-S., Wang, L., Tsang, D.C.W., Lo, C.Y., Leung, M.T., Poon, C.S. (2018). Three-dimensional spatial variability of arsenic-containing soil from geogenic source in Hong Kong: Implications on sampling strategies, Science of The Total Environment, 633, 836-47.
  38. Lam, C.-M., Yu, I.K.M., Medel, F., Tsang, D.C.W., Hsu, S.-C., Poon, C.S. (2018). Life-cycle cost-benefit analysis on sustainable food waste management: The case of Hong Kong International Airport, Journal of Cleaner Production, 187, 751-62.
  39. Hossain, M.U., Wang, L., Yu, I.K.M., Tsang, D.C.W., Poon, C.-S. (2018). Environmental and technical feasibility study of upcycling wood waste into cement-bonded particleboard, Construction and Building Materials, 173, 474-80.
  40. Hossain, M.U., Poon, Chi S., Dong, Ya H., Xuan, D. (2018). Evaluation of environmental impact distribution methods for supplementary cementitious materials, Renewable and Sustainable Energy Reviews, 82, 597-608.
  41. Hossain, M.U., Poon, C.S. (2018). Comparative LCA of wood waste management strategies generated from building construction activities, Journal of Cleaner Production, 177, 387-97.
  42. He, P., Poon, C.S., Tsang, D.C.W. (2018). Comparison of glass powder and pulverized fuel ash for improving the water resistance of magnesium oxychloride cement, Cement and Concrete Composites, 86, 98-109.
  43. Guo, M.-Z., Poon, C.S. (2018). Superior photocatalytic NOx removal of cementitious materials prepared with white cement over ordinary Portland cement and the underlying mechanisms, Cement and Concrete Composites, 90, 42-9.
  44. Cao, L., Yu, I.K.M., Chen, S.S., Tsang, D.C.W., Wang, L., Xiong, X., Zhang, S., Ok, Y.S., Kwon, E.E., Song, H., Poon, C.S. (2018). Production of 5-hydroxymethylfurfural from starch-rich food waste catalyzed by sulfonated biochar, Bioresource Technology, 252, 76-82.
  45. Beiyuan, J., Li, J. S., Tsang, D. C., Wang, L., Poon, C. S., Li, X. D., & Fendorf, S. (2017). Fate of arsenic before and after chemical-enhanced washing of an arsenic-containing soil in Hong Kong. Science of the Total Environment, 599, 679-688.
  46. Cui, J. L., Zhao, Y. P., Li, J. S., Beiyuan, J. Z., Tsang, D. C., Poon, C. S., … & Li, X. D. (2018). Speciation, mobilization, and bioaccessibility of arsenic in geogenic soil profile from Hong Kong. Environmental Pollution, 232, pp.375-384.
  47. Iris, K., Tsang, D.C., Chen, S.S., Wang, L., Hunt, A.J., Sherwood, J., Vigier, K.D.O., Jérôme, F., Ok, Y.S., Poon, C.S. (2017). Polar aprotic solvent-water mixture as the medium for catalytic production of hydroxymethylfurfural (HMF) from bread waste, Bioresource technology, 245, 456-62.
  48. Li, J. S., Beiyuan, J., Tsang, D. C., Wang, L., Poon, C. S., Li, X. D., & Fendorf, S. (2017). Arsenic-containing soil from geogenic source in Hong Kong: Leaching characteristics and stabilization/solidification. Chemosphere, 182, pp.31-39.
  49. Li, J., & Poon, C. S. (2017). Innovative solidification/stabilization of lead contaminated soil using incineration sewage sludge ash. Chemosphere, 173, pp.143-152.
  50. Li, J. S., Guo, M. Z., Xue, Q., & Poon, C. S. (2017). Recycling of incinerated sewage sludge ash and cathode ray tube funnel glass in cement mortars. Journal of Cleaner Production, 152, pp,142-149.
  51. Li, J. S., Xue, Q., Fang, L., & Poon, C. S. (2017). Characteristics and metal leachability of incinerated sewage sludge ash and air pollution control residues from Hong Kong evaluated by different methods. Waste Management, 64, pp.161-170.
  52. Chen, Z., Li, J. S., & Poon, C. S. (2018). Combined use of sewage sludge ash and recycled glass cullet for the production of concrete blocks. Journal of Cleaner Production, 171, pp. 1447-1459.
  53. Fang, L., Li, J. S., Guo, M. Z., Cheeseman, C. R., Tsang, D. C., Donatello, S., & Poon, C. S. (2018). Phosphorus recovery and leaching of trace elements from incinerated sewage sludge ash (ISSA). Chemosphere, 193, pp. 278-287.
  54. Li, J. S., Chen, Z., Wang, Q. M., Fang, L., Xue, Q., Cheeseman, C. R., … & Poon, C. S. (2018). Change in re-use value of incinerated sewage sludge ash due to chemical extraction of phosphorus. Waste Management, Volume 74, April 2018, Pages 404-412
  55. Iris, K., Tsang, D.C., Yip, A.C., Chen, S.S., Ok, Y.S., Poon, C.S. (2017). Valorization of starchy, cellulosic, and sugary food waste into hydroxymethylfurfural by one-pot catalysis, Chemosphere, 184, 1099-107.
  56. Rungchet, A., Poon, C.S, Chindaprasirt, P., Pimraksa, K. (2017). Synthesis of low-temperature calcium sulfoaluminate-belite cements from industrial wastes and their hydration: Comparative studies between lignite fly ash and bottom ash, Cement and Concrete Composites, 83, 10-9.
  57. Chen, S.S., Iris, K., Tsang, D.C., Yip, A.C., Khan, E., Wang, L., Ok, Y.S., Poon, C.S. (2017). Valorization of cellulosic food waste into levulinic acid catalyzed by heterogeneous Brønsted acids: temperature and solvent effects, Chemical Engineering Journal, 327, 328-35.
  58. Xiaoliang Fang, Dongxing Xuan, Chi Sun Poon, (2017). Empirical modelling of CO2 uptake by recycled concrete aggregates under accelerated carbonation conditions, Materials and Structures, 50, pp. 200.
  59. Lei Wang, Season S. Chen, Daniel C. W. Tsang, Chi Sun Poon, Yong Sik Ok, (2017). Enhancing anti-microbial properties of wood-plastic composites produced from timber and plastic wastes, Environmental Science and Pollution Research, 24(13), pp. 12227–12237.
  60. Lei Wang, Iris K. M. Yu, Daniel C. W. Tsang, Shuang Li, Chi Sun Poon, (2017). Mixture Design and Reaction Sequence for Recycling Construction Wood Waste into Rapid-Shaping Magnesia–Phosphate Cement Particleboard, Industrial & Engineering Chemistry Research, 56(23), pp. 6645–6654.
  61. Jiang-Shan Li, Lei Wang, Daniel C.W. Tsang, Jingzi Beiyuan, Chi Sun Poon, (2017). Dynamic leaching behavior of geogenic As in soils after cement-based stabilization/solidification, Environmental Science and Pollution Research, pp. 1-11.
  62. Xuan Dongxing, Poon Chi Sun, (2017). Removal of metallic Al and Al/Zn alloys in MSWI bottom ash by alkaline treatment, Journal of Hazardous Materials, 344, pp. 73-80.
  63. Xuan Dongxing, Zhan Baojian, Poon Chi Sun, (2017). Thermal and residual mechanical profile of recycled aggregate concrete prepared with carbonated concrete aggregates after exposure to elevated temperatures, Fire and Materials, pp. 1-9.
  64. Jiang-shan Li, Daniel C.W. Tsang, Qi-ming Wang, Le Fang, Qiang Xue, Chi Sun Poon, (2017). Fate of metals before and after chemical extraction of incinerated sewage sludge ash, Chemosphere, 186, pp. 350-359.
  65. Md. Uzzal Hossain, Chi Sun Poon, Ya Hong Dong, Irene M. C. Lo, Jack C. P. Cheng, (2017). Development of social sustainability assessment method and a comparative case study on assessing recycled construction materials, The International Journal of Life Cycle Assessment, pp. 1-21.
  66. Lei Wang，Iris K.M. Yu, Daniel C.W. Tsang, Shuang Li, Jiang-shan Li, Chi Sun Poon, Yan-Shuai Wang, Jian-Guo Dai, (2017). Transforming wood waste into water-resistant magnesia-phosphate cement particleboard modified by alumina and red mud, Journal of Cleaner Production, 168, pp. 452-462.
  67. Yan-Shuai Wang, Jian-Guo Dai, Lei Wang, Daniel C.W. Tsang, Chi Sun Poon, (2017). Influence of lead on stabilization/solidification by ordinary Portland cement and magnesium phosphate cement, Chemosphere, 190, pp. 90-96.
  68. Lei Wang, Tiffany L. K. Yeung, Abbe Y. T. Lau, Daniel C. W. Tsang, Chi-Sun Poon, (2017). Recycling contaminated sediment into eco-friendly paving blocks by a combination of binary cement and carbon dioxide curing, Journal of Cleaner Production, 164, pp. 1279-1288.
  69. Tung-Chai Ling, Chi Sun Poon, (2017). Spent fluorescent lamp glass as a substitute for fine aggregate in cement mortar, Journal of Cleaner Production, 161, pp. 646-654.
  70. Wallace W. L. Lai, Missoni Leong-Ying Ho, Ray K.W. Chang, Janet F.C. Sham, Chi-Sun Poon, (2017). Tracing and imaging minor water seepage of concealed PVC pipe in a reinforced concrete wall by high-frequency ground penetrating radar, Construction and Building Materials, 151, pp. 840-847.
  71. Md. Uzzal Hossain, Chi Sun Poon, Ya Hongdong, Dongxing Xuan, (2017). Evaluation of environmental impact distribution methods for supplementary cementitious materials, Renewable and Sustainable Energy Reviews, 82(1), pp. 597-608.
  72. Hui Zhao, Chi Sun Poon, (2017). A comparative study on the properties of the mortar with the cathode ray tube funnel glass sand at different treatment methods, Construction and Building Materials, 148, pp. 900-909.
  73. Jian-Xin Lu, Zhen-Hua Duan, Chi Sun Poon, (2017). Combined use of waste glass powder and cullet in architectural mortar, Cement and Concrete Composites, 82, pp. 34-44.
  74. Jian-Xin Lu, Bao-Jian Zhan, Zhen-Hua Duan, Chi Sun Poon, (2017). Using glass powder to improve the durability of architectural mortar prepared with glass aggregates, Materials & Design, 135, pp. 102-111.
  75. Siong Kang Lim, Cher Siang Tan, Bo Li, Tung-Chai Ling, Md. Uzzal Hossain, Chi Sun Poon, (2017). Utilizing high volumes quarry wastes in the production of lightweight foamed concrete, Construction and Building Materials, 151, pp. 441-448.
  76. Jian-Xin Lu, Bao-Jian Zhan, Zhen-Hua Duan, Chi Sun Poon, (2017). Improving the performance of architectural mortar containing 100% recycled glass aggregates by using SCMs, Construction and Building Materials, 153, pp. 975-985.
  77. Dongxing Xuan, Baojian Zhan, Chi Sun Poon, (2017). Durability of recycled aggregate concrete prepared with carbonated recycled concrete aggregates, Cement and Concrete Composites, 84, pp. 214-221.
  78. Long Li, Chi Sun Poon, Jianzhuang Xiao, Dongxing Xuan, (2017). Effect of carbonated recycled coarse aggregate on the dynamic compressive behavior of recycled aggregate concrete, Construction and Building Materials, 151, pp. 52-62.
  79. Ming-Zhi Guo, Tung-Chai Ling, Chi Sun Poon, (2017). Photocatalytic NOx degradation of concrete surface layers intermixed and spray-coated with nano-TiO2: Influence of experimental factors, Cement and Concrete Composites, 83, pp. 279-289.
  80. Wang, Lei, Chen, Season S., Tsang, Daniel C.W., Poon, Chi Sun, Dai, Jian Guo, (2017). CO2 curing and fibre reinforcement for green recycling of contaminated wood into high-performance cement-bonded particleboards, Journal of CO2 Utilization, 18, pp. 107-116.
  81. Lu Jianxin, Duan Zhenhua, Poon Chi Sun, (2017). Fresh properties of cement pastes or mortars incorporating waste glass powder and cullet, Construction and Building Materials, 131, pp. 793-799.
  82. Hossain Md Uzzal, Wu Zezhou, Poon Chi Sun, (2017). Comparative environmental evaluation of construction waste management through different waste sorting systems in Hong Kong, In Press: doi.org/10.1016/j.wasman.2017.07.043.
  83. Chen Zhen, Poon Chi Sun, (2017). Comparative studies on the effects of sewage sludge ash and fly ash on cement hydration and properties of cement mortars, Construction and Building Materials, 154, pp. 791-803.
  84. Iris K.M. Yu, Daniel C.W. Tsang, Alex C.K. Yip, Season S. Chen, Lei Wang, Yong Sik Ok, Chi Sun Poon, (2017). Catalytic valorization of starch-rich food waste into hydroxymethylfurfural (HMF): Controlling relative kinetics for high productivity, Bioresource Technology, 237, pp. 222-230.
  85. Hossain M.U., Poon Chi Sun, Lo, I.M.C., Cheng, J.C.P., (2017). Comparative LCA on using waste materials in the cement industry: A Hong Kong case study, Resources Conservation and Recycling, 120, pp. 199-208.
  86. Zhenhua Duan, Chi Sun Poon, Jianzhuang Xiao (2017), Using artificial neural networks to assess the applicability recycled aggregate classification by different specifications, Materials and structures, 50(2):107.
  87. Binyu Zhang and Chi Sun Poon (2017). Internal curing effect of high volume furnace bottom ash (FBA) incorporation on lightweight aggregate concrete. Journal of Sustainable Cement-Based Materials, pp. 1-18.
  88. Miren Etxeberria, Ming-Zhi Guo, Anibal Maury-Ramirez, and Chi Sun Poon (2017). Influence of Dust and Oil Accumulation on Effectiveness of Photocatalytic Concrete Surfaces. Journal of Environmental Engineering, 143(9), pp. 1-10.
  89. J. S. Li, Q.Xue, L. Fang, Chi Sun Poon, (2017). Characteristics and metal leachability of incinerated sewage sludge ash and air pollution control residues from Hong Kong evaluated by different methods. Waste Management, 64, pp, 161-170.
  90. Chen Zhen, Poon Chi Sun (2017). Comparing the use of sewage sludge ash and glass powder in cement mortars. Environmental Technology, 38(11), pp.1-9.
  91. Wengui Li, Chu Long, Vivian W.Y. Tam, Chi-Sun Poon, Wen Hui Duan (2017). Effects of nano-particles on failure process and microstructural properties of recycled aggregate concrete. Construction and Building Materials, 142, pp. 42-50.
  92. Pingping He, Chi Sun Poon, Daniel C.W. Tsang, (2017). Effect of pulverized fuel ash and CO2 curing on the water resistance of magnesium oxychloride cement (MOC). Cement and Concrete Research, 97, pp. 115-122.
  93. J.S. Li, Chi Sun Poon, (2017). Innovative solidification/stabilization of lead contaminated soil using incineration sewage sludge ash. Chemosphere, 173, pp. 143-152.
  94. Wenjun Zhu, Raoul François, Chi Sun Poon, Jian-Guo Dai (2017). Influences of corrosion degree and corrosion morphology on the ductility of steel reinforcement, Construction and Building Materials, 148, pp. 297-306.
  95. Pingping He, Chi Sun Poon, Daniel C.W. Tsang (2017). Using incinerated sewage sludge ash to improve the water resistance of magnesium oxychloride cement (MOC), Construction and Building Materials, 147, pp. 519-524.
  96. J.-S. Li, M.-Z. Guo, Q. Xue, Chi Sun Poon, (2017). Recycling of incinerated sewage sludge ash and cathode ray tube funnel glass in cement mortars. Journal of Cleaner Production, 152, pp. 142-149.
  97. J.-S. Li, J.Beiyuan, D.C.W.Tsang, L. Wang, C.S. Poon, X.-D.Li, S. Fendorf, (2017). Arsenic-containing soil from geogenic source in Hong Kong: Leaching characteristics and stabilization/solidification. Chemosphere, 182, pp. 31-39.
  98. Hossain Md. U., Xuan D.X., Poon C.S. (2017). Sustainable management and utilisation of concrete slurry waste: A case study in Hong Kong, Waste Management, 61, pp. 397–404.
  99. Jian-xin Lu, Zhen-hua Duan, Chi Sun Poon (2017). Fresh properties of cement pastes or mortars incorporating waste glass powder and cullet. Construction and Building Materials, 131, pp. 793–799.
  100. Beiyuan, J.Z., Li, J.S., Tsang, D.C.W., Wang, L., Poon, C.S., Li, X.D. (2017). Fendorf. S. Fate of arsenic before and after chemical-enhanced washing of an arsenic-containing soil in Hong Kong. Sci. Total Environ. 599-600, 679-688.
  101. Wang, L., Chen, S.S., Tsang, D.C.W., Poon, C.S., OK, Y.S (2017). Enhancing anti-microbial properties of wood-plastic composites produced from timber and plastic wastes. Environ. Sci. Pollut. R. 24, 12227-12237.
  102. Wang, L., Chen, S.S., Tsang, D.C.W., Poon, C.S., Dai, J.G. (2017). CO2 Curing and Fibre Reinforcement for Green Recycling of Contaminated Wood into High-Performance Cement-Bonded Particleboards. J. CO2 Util. 18, 107-116.
  103. Gonzalez-Corominas, A., Etxeberria, M. & Poon, C. S. (2016). Influence of the Quality of Recycled Aggregates on the Mechanical and Durability Properties of High Performance Concrete. Waste and Biomass Valorization, pp 1–12.
  104. Tu, Z.J., Guo, M.Z., Poon, C.S. and Shi, C.J. (2016). Effects of limestone powder on CaCO3 precipitation in CO2 cured cement pastes. Cement and Concrete Composites, 72, pp. 9-16.
  105. Yu, I.K.M., Tsang, D.C.W., Yip, A.C.K., Chen, S.S., Ok, Y.S., Poon, C.S. (2016). Valorization of carbohydrates and food waste into hydroxymethylfurfural: Roles of Lewis and Brønsted acidity. Bioresource Technology, 219, pp. 338-347.
  106. Pingping He, Caijun Shi, Zhenjun Tu, Chi Sun Poon, Jiake Zhang (2016). Effect of further water curing on compressive strength and microstructure of CO2-cured concrete. Cement and Concrete Composites, 72, pp. 80-88,
  107. Wang, L., Chen, S.S., Tsang, D.C.W., Poon, C.S., Shih, K. (2016). Value-added recycling of construction waste wood into noise and thermal insulating cement-bonded particleboards. Construction and Building Materials, 125, pp. 316-325.
  108. Andreu Gonzalez-Corominas, Miren Etxeberria, Chi Sun Poon (2016). Influence of steam curing on the pore structures and mechanical properties of fly-ash high performance concrete prepared with recycled aggregates. Cement and Concrete Composites, 71, pp. 77-84.
  109. Xuan D.X., Zhan B.J. and Poon C.S. (2016). Development of a New Generation of Eco-friendly Concrete Blocks by Accelerated Mineral Carbonation. Journal of Cleaner Production, 133(1), pp. 1235-1241.
  110. Wang, L., Chen, S.S., Tsang, D.C.W., Poon, C.S., Shih, K. (2016). Recycling contaminated wood into eco-friendly particleboard using green cement and carbon dioxide curing. Journal of Cleaner Production, 2016, 137, pp. 861-870.
  111. Zhan, B. J., Xuan, D. X., Poon, C. S., &Shi, C. J. (2016). Effect of curing parameters on CO2 curing of concrete blocks containing recycled aggregates. Cement and Concrete Composites, 71, pp. 122–130.
  112. Dongxing Xuan, Baojian Zhan, Chi Sun Poon, Wei Zheng (2016), Carbon dioxide sequestration of concrete slurry waste and its valorisation in construction products, Construction and Building Materials. 113, 664-672.
  113. Dongxing Xuan, Baojian Zhan, Chi Sun Poon, Wei Zheng (2016) Innovative reuse of concrete slurry waste from ready-mixed concrete plants in construction Products, J Hazardous Materials, 2016 (312), 65-72.
  114. Long Li, Jianzhuang Xiao, Chi Sun Poon (2016). Dynamic compressive behavior of recycled aggregate concrete. Materials and Structures, 49(11), pp. 4451-4462.
  115. Ri-xin Liu, Chi-sun Poon (2016). Effects of red mud on properties of self-compacting mortar. Journal of Cleaner Production, 135, pp. 1170-1178.
  116. M.U. Hossain, C.S. Poon, I.M.C. Lo, J.C.P. Cheng (2016). “Comparative environmental evaluation of aggregate production from recycled waste materials and virgin sources by LCA”, Resources Conservation & Recycling. Vol. 109, pp. 67-77.
  117. Md. Uzzal Hossain, Shao-Yuan Leu, Chi Sun Poon (2016). “Sustainability analysis of pelletized bio-fuel derived from recycled wood product wastes in Hong Kong”, Journal of Cleaner Production, 113, pp. 400-410.
  118. Zhan Baojian, Poon Chisun, Shi Caijun (2016). “Materials Characteristics Affecting CO2 Curing of Concrete Blocks Containing Recycled Aggregates”. Cement and Concrete Composites, Vol. 67, pp. 50-59.
  119. T.C. Ling, S. C. Kou, C.S. Poon (2016), “Precast architectural tiles produced by double-layer casting method”. Cement and Concrete Composites, Vol. 66, pp. 73-81.
  120. Md. Uzzal Hossain, Chi Sun Poon, Irene M.C. Lo, Jack C.P. Cheng (2016). “Evaluation of environmental friendliness of concrete paving eco-blocks using LCA approach”. The International Journal of Life Cycle Assessment, Vol. 21(1), pp. 70-84.
  121. Dongxing Xuan, Baojian Zhan, Chi Sun Poon (2016), “Assessment of mechanical properties of concrete incorporating carbonated recycled concrete aggregates”. Cement and Concrete Composites, Vol. 65, pp. 67-74.
  122. M.Z. Guo, A. Maury-Ramirez, and C.S. Poon (2016), “Self-cleaning ability of titanium dioxide clear paint coated architectural mortar and its potential in field application”. Journal of Cleaner Production, Vol. 112(4), pp. 3583-3588.
  123. Ri Xin Liu, Chi Sun Poon (2016), “Utilization of red mud derived from bauxite in self-compacting concrete”. Journal of Cleaner Production, Vol. 112(1), pp. 384-391.
  124. Ya Hong Dong, Lara Jaillon, Peggy Chu, C.S. Poon (2015), “Comparing carbon emissions of precast and cast-in-situ construction methods – A case study of high-rise private building”, Construction and Building Materials, Vol. 30, pp. 39-53.
  125. M.Z. Guo, A. Maury-Ramirez, and C.S. Poon (2015), “Versatile photocatalytic functions of self-compacting architectural glass mortars and their inter-relationship”. Materials & Design, Vol. 88, pp. 1260-1268.
  126. M.Z. Guo, A. Maury-Ramirez, and C.S. Poon (2015), “Photocatalytic activities of titanium dioxide incorporated architectural mortars: Effect of weathering and activation light”. Building and Environment, Vol. 94, pp. 395-402.
  127. Zhang, J., Shi, C., Li, Y., Pan, X., Poon, C., and Xie, Z. (2015). “Influence of carbonated recycled concrete aggregate on properties of cement mortar.” Construction and Building Materials, Vol. 98, pp. 1-7.
  128. J.K. Zhang, C.J. Shi, Y.K. Li, X.Y. Pan, C.S. Poon and Z.B. Xie (2015), “Performance Enhancement of Recycled Concrete Aggregates through Carbonation”. Journal of Materials in Civil Engineering, Vol. 27(11): 04015029.
  129. W.G. Li, J.Z. Xiao, C.J. Shi and C.S. Poon (2015), “Structural Behaviour of Composite Members with Recycled Aggregate Concrete – an Overview”. Advances in Structural Engineering, Vol. 18(6), pp. 919-938.
  130. B.J. Zhan and C.S. Poon (2015), “Study on Feasibility of Reutilizing Textile Effluent Sludge for Producing Concrete Blocks”. Journal of Cleaner Production, Vol. 101, pp. 174-179.
  131. M.Z. Guo, Z. Chen, T.C. Ling and C.S. Poon (2015), “Effects of Recycled Glass on Properties of Architectural Mortar before and after Exposure to Elevated Temperatures”. Journal of Cleaner Production, Vol. 101, pp. 158-164.
  132. Wang, L., Tsang, D.C.W., Poon, C.S. (2015). Green remediation and recycling of contaminated sediment by waste-incorporated stabilization/solidification. Chemosphere, 122, pp. 257-264.
  133. Wang, L., Kwok, J.S.H., Tsang, D.C.W., Poon, C.S. (2015) Mixture design and treatment methods for recycling contaminated sediment. Journal of Hazardous Materials, 283, pp. 623-632.
  134. W.L. Lai, K.K. Lee and C.S. Poon (2015), “Validation of Size Estimation of Debonds in External Wall’s Composite Finishes via Passive Infrared Thermography and a Gradient Algorithm”. Construction and Building Materials, Vol. 87, pp. 113-124.
  135. B.Y. Zhang and C.S. Poon (2015), “Use of Furnace Bottom Ash for Producing Lightweight Aggregate Concrete with Thermal Insulation Properties”. Journal of Cleaner Production, Vol. 99, pp. 94-100.
  136. J.Z. Xiao, L. Li, L.M. Shen and C.S. Poon (2015), “Compressive Behaviour of Recycled Aggregate Concrete under Impact Loading”. Cement and Concrete Research, Vol. 71, pp. 46-55.
  137. S.C. Kou and C.S. Poon (2015), “Effect of the Quality of Parent Concrete on the Properties of High Performance Recycled Aggregate Concrete”. Construction and Building Materials, Vol. 77, pp. 501-508.
  138. L. Wang, J.S.H. Kwok, D.C.W. Tsang and C.S. Poon (2015), “Mixture Design and Treatment Methods for Recycling Contaminated Sediment”. Journal of Hazardous Materials, Vol. 283, pp. 623-632.
  139. L. Wang, D.C.W. Tsang and C.S. Poon (2015), “Green Remediation and Recycling of Contaminated Sediment by Waste-incorporated Stabilization/Solidification”. Chemosphere, Vol. 122, pp. 257–264.
  140. Z.H. Duan and C.S. Poon (2014), “Factors Affecting the Properties of Recycled Concrete by Using Neural Networks”. Computers and Concrete, Vol. 14, pp. 547-561.
  141. T.C. Ling and C.S. Poon (2014), “Use of CRT funnel glass in concrete blocks prepared with different aggregate-to-cement ratios”. Proceedings of the ICE-Green Materials, Vol. 2(1), pp. 43-51.
  142. B.J. Zhan, C.S. Poon, Q. Liu, S.C. Kou and C.J. Shi (2014), “Experimental Study on CO2 Curing for Enhancement of Recycled Aggregate Properties”. Construction and Building Materials, Vol. 67(A), pp. 3-7.
  143. S.C. Lau, M. Lu and C.S. Poon (2014), “Formalized Approach to Discretize a Continuous Plant in Construction Simulations”. Journal of Construction Engineering and Management (ASCE), Vol. 140, pp. 1-9.
  144. T.C. Ling and C.S. Poon (2014), “Feasible Use of Large Volumes of GGBS in 100% Recycled Glass Architectural Mortar”. Cement and Concrete Composites, Vol. 53, pp. 350–356.
  145. S.C. Kou, C.S. Poon and M. Etxeberria (2014), “Residue Strength, Water Absorption and Pore Size Distributions of Recycled Aggregate Concrete after Exposure to Elevated Temperatures”. Cement and Concrete Composites, Vol. 53, pp. 73-82.
  146. P. Thongsanitgarn, W. Wongkeo, A. Chaipanich and C.S. Poon (2014), “Heat of Hydration of Portland High-calcium Fly Ash Cement Incorporating Limestone Powder: Effect of Limestone Particle Size”. Construction and Building Materials, Vol. 66, pp. 410–7.
  147. Z.H. Duan and C.S. Poon (2014), “Properties of Recycled Aggregate Concrete Made with Recycled Aggregates with Different Amounts of Old Adhered Mortars”. Materials and Design, Vol. 58, pp. 19-29.
  148. S.C. Kou, B.J. Zhan and C.S. Poon (2014), “Use of a CO2 Curing Step to Improve the Properties of Concrete Prepared with Recycled Aggregates”. Cement and Concrete Composites, Vol. 45, pp. 22–28.
  149. L. Jaillon and C.S. Poon (2014), “Life Cycle Design and Prefabrication in Buildings: A Review and Case Studies in Hong Kong”. Automation in Construction, Vol. 39, pp. 195–202.
  150. T.C. Ling and C.S. Poon (2014), “Use of Recycled CRT Funnel Glass as Fine Aggregate in Dry-mixed Concrete Paving Blocks”. Journal of Cleaner Production, Vol. 68, pp. 209-215. 
  151. T.C. Ling and C.S. Poon (2014), “High Temperatures Properties of Barite Concrete with Cathode Ray Tube Funnel Glass”. Fire and Materials, Vol. 38(2), pp. 279-289.
  152. M.Z. Guo and C.S. Poon (2013), “Photocatalytic NO Removal of Concrete Surface Layers Intermixed with TiO2”. Building and Environment, Vol. 70, pp. 102-109.
  153. W.L. Lai, Y.H. Wang, S.C. Kou and C.S. Poon (2013), “Dispersion of Ultrasonic Guided Surface Wave by Honeycomb in Early-aged Concrete”. NDT&E INTERNATIONAL, Vol. 57, pp.7-16.
  154. Z. Xiao, T.C. Ling, C.S. Poon, S.C. Kou, Q. Wang and R. Huang (2013), “Properties of Partition Wall Blocks Prepared with High Percentages of Recycled Clay Brick after Exposure to Elevated Temperatures”. Construction and Building Materials, Vol. 49, pp 56-61.
  155. T.C. Ling and C.S. Poon (2013), “Use of Phase Change Materials for Thermal Energy Storage in Concrete- An Overview”. Construction and Building Materials, Vol. 46, pp. 55-62.
  156. B.J. Zhan, C.S. Poon and C.J. Shi (2013), “CO2 Curing for Improving the Properties of Concrete Blocks Containing Recycled Aggregates”. Cement and Concrete Composites, Vol. 42, pp. 1-8.
  157. T.C. Ling, C.S. Poon, W.S. Lam, T.P. Chan and K.L. Fung (2013), “X-Ray Radiation Shielding Properties of Cement Mortar Prepared with Different Types of Aggregate”. Materials and Structures, Vol. 46(7), pp. 1133-1141.
  158. T.C. Ling and C.S. Poon (2013), “Stress-Strain Behaviour of Fire Exposed Self-Compacting Glass Concrete”. Fire and Materials, Vol. 37(4), pp. 297-310.
  159. G. Cheng, K. Zhang, S. Kou and C.S. Poon (2013) “Effect of Typical Construction Solid Waste on Properties of environment-friendly block”. Chinese Journal of Environmental Engineering, Vol. 7(7), pp. 2716-2720.
  160. H. Zhao, C.S. Poon and T.C. Ling (2013), “Utilizing Recycled Cathode Ray Tube Funnel Glass Sand as River Sand Replacement in the High-Density Concrete”. Journal of Cleaner Production, Vol. 51, pp. 184-190.
  161. Z.H. Duan, S.C. Kou and C.S. Poon (2013), “Using Artificial Neural Networks for Predicting the Elastic Modulus of Recycled Aggregate Concrete”. Construction and Building Materials, Vol. 44, pp. 524–532.
  162. Z.H. Duan, S.C. Kou and C.S. Poon (2013), “Prediction of Compressive Strength of Recycled Aggregate Concrete Using Artificial Neural Networks”. Construction and Building Materials, Vol. 40, pp. 1201-1206.
  163. Y.G. Zhu, S.C. Kou, C.S. Poon, J.G. Dai and Q.Y. Li (2013), “Influence of Silane-based Water Repellent on the Durability Properties of Recycled Aggregate Concrete”.  Cement and Concrete Composite, Vol. 35, pp. 32-38.
  164. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang and K.K. Lee (2013), “A Durability Study of Externally Bonded FRP-Concrete Beams via Full-Field Infrared Thermography (IRT) and Quasi-Static Shear Test”. Construction and Building Materials, Vol. 40, pp. 481-491.
  165. T.C. Ling, C.S. Poon and H.K. Wong (2013), “Management and Recycling of Waste Glass in Concrete Products: Current Situations in Hong Kong”. Resources, Conservation and Recycling, Vol. 70, pp. 25-31.
  166. T.C. Ling and C.S. Poon (2013), “Effects of Particle Size of Treated CRT Funnel Glass on Properties of Cement Mortar”. Materials and Structures, Vol. 46(1-2), pp. 25-34.
  167. S.C. Kou and C.S. Poon (2013), “Long-Term Mechanical and Durability Properties of Recycled Aggregate Concrete Prepared with the Incorporation of Fly Ash”. Cement and Concrete Composites, Vol. 37, pp. 12–19.
  168. S.C. Kou and C.S. Poon (2013), “A Novel Polymer Concrete Made with Recycled Glass Aggregates, Fly Ash and Metakaolin”. Construction and Building Materials, Vol. 41, pp. 146–151.
  169. M.Z. Guo, T.C. Ling and C.S. Poon (2013), “Nano-TiO2-Based Architectural Mortar for NO Removal and Bacteria Inactivation: Influence of Coating and Weathering Conditions”. Cement and Concrete Composites, Vol. 36, pp.101-108.
  170. Z. Hui, C.S. Poon and T.C. Ling (2013), “Properties of Mortar Prepared with Recycled Cathode Ray Tube Funnel Glass Sand at Different Mineral Admixture”. Construction and Building Materials, Vol. 40, pp. 951-60.
  171. G. Lee, C.S. Poon, Y.L. Wong and T.C. Ling (2013), “Effects of Recycled Fine Glass Aggregates on the Properties of Dry–Mixed Concrete Blocks”. Construction and Building Materials, Vol. 38, pp. 638–643.
  172. C.S. Poon, A.T.W. Yu, A. Wong and R. Yip (2013), “Quantifying the Impact of Construction Waste Charging Scheme on Construction Waste Management in Hong Kong”. Journal of Construction Engineering and Management, ASCE, Vol. 139 (5), pp. 466-479.
  173. C.S. Poon (2013), “Editorial”. Construction and Building Materials, Vol. 40, pp. 1167.
  174. A.T.W. Yu, C.S. Poon, A. Wong, R. Yip and L. Jaillon (2013), “Impact of Construction Waste Disposal Charging Scheme on Work Practices at Construction Sites in Hong Kong”. Waste Management, Vol. 33(1), pp. 138-146.
  175. S.C. Kou and C.S. Poon (2013), “Effects of Different Kinds of Recycled Fine Aggregate on Properties of Rendering Mortar”. Journal of Sustainable Cement-Based Materials, Vol. 2(1), pp. 43-57.
  176. W.L. Lai and C.S. Poon (2012), “Applications of Nondestructive Evaluation Techniques in Concrete Inspection”. HKIE Transactions, Vol. 19(4), pp. 34-41.
  177. S.C. Kou and C.S. Poon (2012), “Effect of Quality of Parent Concrete on the Mechanical Properties of High Performance Recycled Aggregate Concrete”. Journal of the Chinese Ceramic Society, No. 1, pp. 7.
  178. J.Z. Xiao, W.G. Li and C.S. Poon (2012), “Recent Studies on Mechanical Properties of Recycled Aggregate Concrete in China-A Review”. Science China-Technological Sciences, Vol. 55(6), pp. 1463-1480.
  179. J. Chen, S.C. Kou and C.S. Poon (2012), “Hydration and properties of nano-TiO2 blended cement composites”. Cement and Concrete Composites, Vol. 34(5), pp. 642–649.
  180. T.C. Ling, C.S. Poon, W.S. Lam, T.P. Chan and K.L. Fung (2012), “Utilization of Recycled Cathode Ray Tubes Glass in Cement Mortar for X-Ray Radiation-Shielding Applications”. Journal of Hazardous Materials, Vol. 199-200, pp. 321-327.
  181. T.C. Ling, C.S. Poon and S.C. Kou (2012), “Influence of Recycled Glass Content and Curing Conditions on the Properties of Self-Compacting Concrete after Exposure to Elevated Temperature”. Cement and Concrete Composites, Vol. 34(2), pp. 265-272.
  182. T.C. Ling and C.S. Poon (2012), “Feasible Use of Recycled CRT Funnel Glass as Heavyweight Fine Aggregate in Barite Concrete”. Journal of Cleaner Production, Vol. 33, pp. 42-49.
  183. T.C. Ling and C.S. Poon (2012), “Development of a Method for Recycling of CRT Funnel Glass”. Environmental Technology, Vol. 33(22), pp. 2531-2537. (Special Issue: Advanced Waste Treatment Technology).
  184. T.C. Ling and C.S. Poon (2012), “A Comparative Study on the Feasible Use of Recycled Beverage and CRT Funnel Glass as Fine Aggregates in Cement Mortar”. Journal of Cleaner Production, Vol. 29-30, pp. 46-52.
  185. W.L. Lai, K.K. Lee, S.C. Kou, C.S. Poon and W.F. Tsang (2012), “A Study of Full-Field Debond Behaviour and Durability of CFRP-Concrete Composite Beams by Pulsed Infrared Thermography (IRT)”. NDT&E International, Vol. 52, pp. 112-121.
  186. W.L. Lai, S.C. Kou and C.S. Poon (2012), “Unsaturated Zone Characterization in Soil through Transient Wetting and Drying Using GPR Joint Time-Frequency Analysis and Grayscale Images”. Journal of Hydrology, Vol. 452–453, pp. 1–13.
  187. S.C. Kou, B.J. Zhan and C.S. Poon (2012), “Properties of Partition Wall Blocks Prepared with Fresh Concrete Wastes”. Construction and Building Materials, Vol. 28(2), pp. 758-766.
  188. S.C. Kou, B.J. Zhan and C.S. Poon (2012), “Feasibility Study of Using Recycled Fresh Concrete Waste as Coarse Aggregates in Concrete”. Construction and Building Materials, Vol. 28(1), pp. 549-556.
  189. S.C. Kou, C.S. Poon and H.W. Wan (2012), “Properties of Concrete Prepared with Low-grade Recycled Aggregates”. Construction and Building Materials, Vol. 36, pp. 881-889.
  190. S.C. Kou and C.S. Poon (2012), “Enhancing Durability Properties of Concrete Prepared with Coarse Recycled Aggregate”. Construction and Building Materials, Vol. 35, pp. 69-76.
  191. M.Z. Guo, T.C. Ling and C.S. Poon (2012), “TiO2 Based Self-Compacting Glass Mortar: Comparison of Photocatalytic Nitrogen Oxide Removal and Bacteria Inactivation”. Building and Environment, Vol. 53, pp. 1-6.
  192. Barbudo, F. Agrela, J. Ayuso, J.R. Jimenez and C.S. Poon (2012), “Statistical Analysis of Recycled Aggregates Derived from Different Sources for Sub-Base Applications”. Construction and Building Materials, Vol. 28, pp. 129–138.
  193. Z. Xiao, T.C. Ling, S.C. Kou, Q.Y. Wang and C.S. Poon (2011), “Use of Wastes Derived from Earthquakes for the Production of Concrete Masonry Partition Wall Blocks”. Waste Management, Vol. 31(8), pp. 1859-1866.
  194. C.S. Poon, H. Zhao and S.C. Kou (2011), “Development Trend of Radiation Shielding Concrete”. Journal of Wuhan University of Technology, Vol. 33(1), pp. 45-51.
  195. T.C. Ling, C.S. Poon and S.C. Kou (2011), “Feasibility of Using Recycled Glass in Architectural Cement Mortar”. Cement and Concrete Composites, Vol. 33(8), pp. 848-854.
  196. T.C. Ling and C.S. Poon (2011), “Utilization of Recycled Glass Derived from Cathode Ray Tube Glass as Fine Aggregate in Cement Mortar”. Journal of Hazardous Materials, Vol. 192(2), pp. 451-456.
  197. T.C. Ling and C.S. Poon (2011), “Properties of Architectural Mortar Prepared with Recycled Glass with Different Particle Sizes”. Materials and Design, Vol. 32(5), pp. 2675-2684.
  198. G. Lee, T.C. Ling, Y.L. Wong and C.S. Poon (2011), “Effects of Crushed Glass Cullet Sizes, Casting Methods and Pozzolanic Materials on ASR of Concrete Blocks”. Construction and Building Materials, Vol. 25(5), pp. 2611-2618.
  199. P.T.I. Lam, E.H.W. Chan, C.K. Chau and C.S. Poon (2011), “A Sustainable Framework of Green Specification for Construction in Hong Kong”. Journal of Facilities Management, Vol. 9(1), pp. 16-33. 
  200. S.C. Kou, C.S. Poon and M. Etxeberria (2011), “Influence of Recycled Aggregates on Long Term Mechanical Properties and Pore Size Distribution of Concrete”. Cement and Concrete Composites, Vol. 33(2), pp. 286-291.
  201. S.C. Kou, C.S. Poon and F. Agrela (2011), “Comparisons of Natural and Recycled Aggregate Concretes Prepared with the Addition of Different Mineral Admixtures”. Cement and Concrete Composites, Vol. 33(8), pp. 788-795.
  202. S.C. Kou and C.S Poon (2011), “Properties of Cementitious Rendering Mortar Prepared with Three Different Kinds of Recycled Fine Aggregates”. Journal of Wuhan University of Technology, Vol. 26(4), pp. 68-74.
  203. J. Chen, S.C. Kou and C.S. Poon (2011), “Photocatalytic Cement-based Materials: Comparison of Nitrogen Oxides and Toluene Removal Potentials and Evaluation of Self-cleaning Performance”. Building and Environment, Vol. 46(9), pp. 1827-1833.
  204. C.S. Poon and T.C. Ling (2010), “Use of Recycled Glass in Architectural Mortar.” Journal of Wuhan University of Technology, Vol. 32(17), pp. 231-5.
  205. C.S. Poon and S.C. Kou (2010), “Properties of Cementitious Rendering Mortar Prepared with Recycled Fine Aggregates.” Journal of Wuhan University of Technology, Materials Science Edition, Vol. 25(6), pp. 1053-1056.
  206. P.T.I. Lam, E.H.W. Chan, C.K. Chau, C.S. Poon and K.P. Chun (2010), “Factors Affecting the Implementation of Green Specifications in Construction”. Journal of Environmental Management, Vol. 91(3), pp. 654-661.
  207. P.T.I. Lam, E.H.W. Chan, C.K. Chau, C.S. Poon and K.P. Chun (2010), “Environmental Management System vs. Green Specifications: How Do They Complement Each Other in the Construction Industry?”. Journal of Environmental Management, Vol. 92(3), pp. 788-795.
  208. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang and C.C. Lai (2010), “Characterization of the Deterioration of Externally Bonded CFRP-concrete Composites Using Quantitative Infrared Thermography”. Cement and Concrete Composites, Vol. 32(9), pp. 740-746.
  209. S.C. Kou and C.S. Poon (2010), “Properties of Concrete Prepared with PVA-impregnated Recycled Concrete Aggregates”. Cement and Concrete Composites, Vol. 32(8), pp. 649-654.
  210. L. Jaillon and C.S. Poon (2010), “Design Issues of Using Prefabrication in Hong Kong Building Construction”. Construction Management and Economics, Vol. 28(10), pp. 1025-1042.
  211. R.C.P. Yip and C.S. Poon (2009), “Cultural Shift towards Sustainability in the Construction Industry of Hong Kong”. Journal of Environmental Management, Vol. 90(11), pp. 3616-3628.
  212. X.C. Qiao, C.R. Cheeseman and C.S. Poon (2009), “Influences of Chemical Activators on Incinerator Bottom Ash”. Waste Management, Vol. 29(2), pp. 544-549.
  213. C.S. Poon, S.C. Kou, H.W. Wan and M. Etxeberria (2009), “Properties of Concrete Blocks Prepared with Low Grade Recycled Aggregates”. Waste Management, Vol. 29(8), pp. 2369-2377.
  214. M. Lu, S.C. Lau and C.S. Poon (2009), “Simulation Approach to Evaluating Cost Efficiency of Selective Demolition Practices: Case of Hong Kong’s Kai Tak Airport Demolition”. Journal of Construction Engineering and Management-ASCE, Vol. 135(6), pp. 448-457.
  215. P.T.I. Lam, E.H.W. Chan, C.K. Chau, C.S. Poon and K.P. Chun (2009), “Integrating Green Specifications in Construction and Overcoming Barriers in their Use”. Journal of Professional Issues in Engineering Education and Practice, ASCE, Vol. 135(4), pp. 142-152.
  216. W.L. Lai, S.C. Kou, W.F. Tsang and C.S. Poon (2009), “Characterization of Concrete Properties from Dielectric Properties Using Ground Penetrating Radar”. Cement and Concrete Research, Vol. 39(8), pp. 687-695.
  217. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang and C.C. Lai (2009), “Effects of Elevated Water Temperature on Interfacial Delaminations, Failure Modes and Shear Strength in Externally-Bonded CFRP-Concrete Beams Using Infrared Thermography, Gray-Scale Images and Direct Shear Test”. Construction and Building Materials, Vol. 23(10), pp. 3152-3160.
  218. W.L. Lai, S.C. Kou, C.S. Poon, W.F. Tsang, S.P. Ng and Y.Y. Hung (2009), “Characterization of Flaws Embedded in Externally Bonded CFRP on Concrete Beams by Infrared Thermography and Shearography”. Journal of Nondestructive Evaluation, Vol. 28, pp. 27–35.
  219. S.C. Kou and C.S. Poon (2009), “Properties of Self-Compacting Concrete Prepared with Coarse and Fine Recycled Concrete Aggregates”. Cement and Concrete Composites, Vol. 31(9), pp. 622-627.
  220. S.C. Kou and C.S. Poon (2009), “Properties of Self-Compacting Concrete Prepared with Recycled Glass Aggregate”. Cement and Concrete Composites, Vol. 31(2), pp. 107-113.
  221. S.C. Kou and C.S. Poon (2009), “Properties of Concrete Prepared with Crushed Fine Stone, Furnace Bottom Ash and Fine Recycled Aggregate as Fine Aggregates”. Construction and Building Materials, Vol. 23(8), pp. 2877-2886.
  222. S.C. Kou, G. Lee, C.S. Poon and W.L. Lai (2009), “Properties of Lightweight Aggregate Concrete Prepared with PVC Granules Derived from Scraped PVC Pipes”. Waste Management, Vol. 29(2), pp. 621-628.
  223. P.S. Ko and C.S. Poon (2009), “Domestic Waste Management and Recovery in Hong Kong”. Journal of Mater Cycles Waste Management, Vol. 11, pp. 104-109.
  224. L. Jaillon and C.S. Poon (2009), “The Evolution of Prefabricated Residential Building Systems in Hong Kong: A Review of the Public and the Private Sector”. Automation in Construction, Vol. 18(3), pp. 239-248.
  225. L. Jaillon, C.S. Poon and Y.H. Chiang (2009), “Quantifying the Waste Reduction Potential of Using Prefabrication in Building Construction in Hong Kong”. Waste Management, Vol. 29(1), pp. 309-320.
  226. J. Chen and C.S. Poon (2009), “Photocatalytic Construction and Building Materials: From Fundamentals to Applications”. Building and Environment, Vol. 44(9), pp. 1899-1906.
  227. J. Chen and C.S. Poon (2009), “Photocatalytic Activity of Titanium Dioxide Modified Concrete Materials – Influence of Utilizing Recycled Glass Cullets as Aggregates”. Journal of Environmental Management, Vol. 90(11), pp. 2436-3442.
  228. J. Chen and C.S. Poon (2009), “Photocatalytic Cementitious Materials: Influence of the Microstructure of Cement Paste on Photocatalytic Pollution Degradation”. Environmental Science & Technology, Vol. 43(23), pp. 8948-8952.
  229. Baldwin, C.S. Poon, L.Y. Shen, S. Austin and I. Wong (2009), “Designing out Waste in High-Rise Residential Buildings: Analysis of Precasting Methods and Traditional Construction”. Renewable Energy, Vol. 34(9), pp. 2067-2073.
  230. C.S. Poon and S.C. Kou (2009), “Research Progress of Concrete Using Recycled Aggregates in Hong Kong”. Journal of Qingdao Technological University, Vol. 30(4).
  231. C.S .Poon and S.C. Kou (2009), “Quality Control of Recycled Aggregates Derived from Construction and Demolition Wastes”. Journal of Sichuan University (Engineering Science Edition), Vol. 41(3).
  232. R. Yip and C.S. Poon (2008), “Comparison of Timber and Metal Formwork System”. Proceedings, ICE Waste and Resources Management, Vol. 161, pp. 29-36.
  233. X.C. Qiao, M. Tyrer, C.S. Poon and C.R. Cheeseman (2008), “Novel Cementitious Materials Produced from Incinerator Bottom Ash”. Resources, Conservation and Recycling, Vol. 52(3), pp. 496-510.
  234. X.C. Qiao, B.R. Ng, M. Tyrer, C.S. Poon and C.R. Cheeseman (2008), “Production of Lightweight Concrete Using Incinerator Bottom Ash”. Construction and Building Materials, Vol. 22(4), pp. 473-480.
  235. X.C. Qiao, M. Tyrer, C.S. Poon and C.R. Cheeseman (2008), “Characterisation of Alkali-Activated Thermally Treated Incinerator Bottom Ash”. Waste Management, Vol. 28(10), pp. 1955-1962. 
  236. C.S. Poon (2008), “Management of CRT Glass from Discarded Computer Monitors and TV Sets”. Waste Management, Vol. 28(9), pp. 1499.
  237. C.S. Lam and C.S. Poon (2008), “The Effect of Aggregates-to-Cement Ratio and Types of Aggregates on the Properties of Pre-Cast Concrete Blocks”. Cement and Concrete Composites, Vol. 30(4), pp. 283-289.
  238. S.C. Kou, C.S. Poon and L. Lam (2008), “The Effect of Recycled Aggregate Paving Blocks with Classified Fly Ash and Rejected Fly Ash with the Addition of Anhydrite and Flue Gas Desulphrisation Sludge (FGDS)”. Journal of Wuhan University of Technology, Vol. 23(3), pp. 68-74.
  239. S.C. Kou, C.S. Poon and D. Chan (2008), “Influence of Fly Ash as a Cement Addition on the Hardened Properties of Recycled Aggregate Concrete”. Materials and Structures, Vol. 41(7), pp. 1191-1201.
  240. S.C. Kou and C.S. Poon (2008), “Mechanical Properties of 5-year-old Concrete Prepared with Recycled Aggregates Obtained from Three Different Sources”. Magazine of Concrete Research, Vol. 60(1), pp. 57-64.
  241. L. Jaillon and C.S. Poon (2008), “Sustainable Construction Aspects of Using Prefabrication in Dense Urban Environment: A Hong Kong Case Study”. Construction Management and Economics, Vol. 26(9), pp. 953-966.
  242. A.N. Baldwin, L.Y. Shen, C.S. Poon, S.A. Austin and I. Wong (2008), “Modeling Design Information to Evaluate Pre-Fabricated and Pre-Cast Design Solutions for Reducing Construction Waste in High Rise Residential Buildings”. Automation in Construction, Vol. 17(3), pp. 333-341.
  243. X.C. Qiao, C.S. Poon and C.R. Cheeseman (2007), “Investigation into the Stabilization/Solidification Performance of Portland Cement through Cement Clinker Phases”. Journal of Hazardous Materials, Vol. 139(2), pp. 238-243.
  244. C.S. Poon, S.C. Kou and L. Lam (2007), “Influence of Recycled Aggregates on Slump and Bleeding of Fresh Concrete”. Material and Structures, Vol. 40(9), pp. 981-988.
  245. C.S. Poon and E. Cheung (2007), “NO Removal Efficiency of Photocatalytic Paving Blocks Prepared with Recycled Materials”. Construction and Building Materials, Vol. 21(8), pp. 1746-1753.
  246. C.S. Poon and D. Chan (2007), “The Use of Recycled Aggregates in Concrete in Hong Kong”. Resources, Conservation and Recycling, Vol. 50(3), pp. 293-305.
  247. C.S. Poon and D. Chan (2007), “Effects of Contaminants on the Properties of Concrete Paving Blocks Prepared with Recycled Concrete Aggregates”. Construction and Building Materials, Vol. 21(1), pp. 164-175.
  248. C.S. Poon (2007), “Reducing Construction Waste”. Waste Management, Vol. 27(12), pp. 1715-1716.
  249. C.S. Poon (2007), “Management of Construction and Demolition Waste”. Waste Management, Vol. 27(2), pp. 159-160.
  250. C.S. Lam, C.S. Poon and Dixon Chan (2007), “Enhancing the Performance of Pre-Cast Concrete Blocks by Incorporating Waste Glass – ASR Consideration”. Cement and Concrete Composites, Vol. 29(8), pp. 616-625.
  251. S.C. Kou, C.S. Poon and D. Chan (2007), “Influence of Fly Ash as Cement Replacement on the Properties of Recycled Aggregate Concrete”. Journal of Materials in Civil Engineering, Vol. 19(9), pp. 709-717.
  252. S.C. Kou and C.S. Poon (2007), “An Experimental Study on Hardened Properties of Steam Cured Recycled Aggregate Concrete Containing Class F Fly Ash”. Journal of Wuhan University of Technology, Vol. 22(2), pp. 101-108.
  253. Y.F. Fu, Y.L. Wong, C.S. Poon and C.A. Tang (2007), “Numerical Tests of Thermal Cracking Induced by Temperature Gradient in Cement-Based Composites under Thermal Loads”. Cement and Concrete Composites, Vol. 29(2), pp. 103-116.
  254. C.S .Poon and S.C. Kou (2007), “New Technology of Sustainable Utilization of Construction and Demolition Waste”. Journal of Wuhan University of Technology, Vol. 29(1), In Chinese.
  255. A.N. Baldwin, S.A. Austin, C.S. Poon, L.Y. Shen and I. Wong (2007), “Reducing Waste in High Rise Residential Buildings by Information Modeling at the Design Stage”. Surveying and Built Environment, Vol. 18(1), pp. 51-62.
  256. D. Chan and C.S. Poon (2006), “Effects of Fine Recycled Aggregate as Sand Replacement in Concrete”. HKIE Transactions, Vol. 13(4), pp. 2-6.
  257. C.S. Poon and E. Cheung (2006), “Performance of Photo-Catalytic Paving Blocks Made from Waste”. Proceedings of Institution of Civil Engineers, Waste and Resource Management, Vol. 159(4), pp. 165-172.
  258. Y.F. Fu, Y.L. Wong, C.S. Poon and C.A. Tang (2006), “Literature Review of Study on Mechanism of Explosive Spalling in Concrete at Elevated Temperature”. Journal of Building Materials, Vol. 9(3), pp. 323-329.
  259. D. Chan and C.S. Poon (2006), “Using Recycled Construction Waste as Aggregates for Paving Blocks”. Proceedings of Institution of Civil Engineers, Waste and Resource Management, Vol. 159(WR2), pp. 83-92.
  260. Y.L. Wong, Y.F. Fu, C.S. Poon and C.A. Tang (2006), “Spalling of Concrete Cover of Fibre-Reinforced Polymer Reinforced Concrete Under Thermal Loads”. Materials and Structures, Vol. 39, pp. 991-999.
  261. C.S. Poon, X.C. Qiao, Z.S. Lin and C.R. Chesseman (2006), “Feasibility of Using Reject Fly Ash in Cement Based Stabilization/Solidification Processes”. Environmental Engineering Science, Vol. 23(1), pp. 14-23.
  262. C.S. Poon, X.C. Qiao and D. Chan (2006), “The Cause and Influence of Self-Cementing Properties of Fine Recycled Concrete Aggregates on the Properties of Unbound Sub-Base”. Waste Management, Vol. 26(10), pp. 1166-1172.
  263. C.S. Poon, S.C. Kou and L. Lam (2006), “Compressive Strength, Chloride Diffusivity and Pore Structure of High Performance Metakaolin and Silica Fume Concrete”. Construction and Building Materials, Vol. 20(10), pp. 858-865.
  264. C.S. Poon, S.C. Kou and D. Chan (2006), “Influence of Steam Curing on Hardened Properties of Recycled Aggregate Concrete”. Magazine of Concrete Research, Vol. 58(5), pp. 289-299.
  265. C.S. Poon and D. Chan (2006), “Paving Blocks Made with Recycled Concrete Aggregate and Crushed Clay Brick”. Construction and Building Materials, Vol. 20(8), pp. 569-577.
  266. C.S. Poon and D. Chan (2006), “Feasible Use of Recycled Concrete Aggregates and Crushed Clay Brick as Unbound Road Sub-Base”. Construction and Building Materials, Vol. 20(8), pp. 578-585.
  267. X.C. Qiao, C.S. Poon and E. Cheung (2006), “Comparative Studies of Three Methods for Activating Rejected Fly Ash”. Advances in Cement Research, Vol. 18 (4), pp. 165-170.
  268. X.C. Qiao, C.S Poon and C. Cheeseman (2006), “Use of Flue Gas Desulphurisation (FGD) Waste and Rejected Fly Ash in Waste Stabilization/Solidification Systems”. Waste Management, Vol. 26(2), pp. 141-149.
  269. X.C. Qiao, C.S. Poon and C.R. Chessesman (2006), “Transfer Mechanism of Contaminants in Cement Based Stabilized/Solidified Wastes”. Journal of Hazardous Materials, Vol. 129(1-3), pp. 290-296.
  270. M. Lu, C.S. Poon and L.C. Wong (2006), “Application Framework for Mapping and Simulation of Waste Handling Processes in Construction”. ASCE, Journal of Construction Engineering and Management, pp. 1212-1221.
  271. S.C. Kou and C.S. Poon (2006), “Compressive Strength, Pore Size Distribution and Chloride-ion Penetration of Recycled Aggregate Concrete Incorporating Class F Fly Ash”. Journal of Wuhan University of Technology, Vol. 21(4), pp. 130-136.
  272. S.C. Kou, C.S. Poon and L. Lam (2006), “The Effect of Recycled Aggregate Paving Blocks with Classified Fly Ash and Rejected Fly Ash the Addition of Anhydrite and Flue Gas Desulphrisation Sludge (FGDS)”. Journal of Wuhan University of Technology.
  273. C.S. Poon (2005), “Effective Management of Municipal Solid Waste”. Waste Management, Vol. 25(8), pp. 767.
  274. Y.F. Fu, Y.L. Wong, C.S. Poon and C.A. Tang (2005), “Stress-Strain Behaviour of High Strength Concrete at Elevated Temperature”. Magazine of Concrete Research, Vol. 57(9), pp. 535-554.
  275. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S .Poon (2005), “Leaching Behaviors of Heavy Metals in the Solidification/Stabilization Matrix Contained Rejected Fly Ash Blended and Cement”. Journal of Wuhan University of Technology, Vol. 27(10), In Chinese.
  276. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S .Poon (2005), “Study of Solidification and Stabilization of Heavy Metals Using Rejected Fly Ash Blended Cement Pastes”. Journal of Wuhan University of Technology, Vol. 27(3), In Chinese.
  277. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S .Poon (2004), “Chemical Activation of Rejected Fly Ash Using Alkali Sulphate”. Journal of Wuhan University of Technology, Vol. 26(6), In Chinese.
  278. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S. Poon (2004), “Influence of Chemical Activators on the Pozzolanic Properties of Rejected Fly Ash Blended and Cement”. Journal of Wuhan University of Technology, Vol. 26(4), In Chinese.
  279. R.C.K. Wong, J.E. Gillott, S. Law, M.J. Thomas and C.S. Poon (2004), “Calcined Oil Sands Fine Tailings as a Supplementary Cementing Material for Concrete”. Cement and Concrete Research, Vol. 34(7), pp. 1235-1242.
  280. C.S. Poon, Z.H. Shui and L. Lam (2004), “Compressive Behavior of Fiber Reinforced High-Performance Concrete Subjected to Elevated Temperatures”. Cement and Concrete Research, Vol. 34(12), pp. 2215-2222.
  281. C.S. Poon and D.W.S. Ho (2004), “A Feasibility Study on the Utilization of r-FA in SCC”. Cement and Concrete Research, Vol. 34(12), pp. 2337-2339.
  282. C.S. Poon, A.T.W. Yu, S.C. See and E. Cheung (2004), “Minimizing Demolition Wastes in Hong Kong Public Housing Projects”. Construction Management and Economics, Vol. 22, pp. 799-805.
  283. C.S. Poon, T.W. Yu, S.W. Wong and E. Cheung (2004), “Management of Construction Waste in Public Housing Projects in Hong Kong”. Construction Management and Economics, Vol. 22, pp. 675-689.
  284. C.S. Poon, X.C. Qiao and Z.S. Lin (2004), “Effect of Flue Gas Desulphurization Sludge on the Pozzolanic Reaction of Reject-Fly-Ash-Blended Cement Pastes”. Cement and Concrete Research, Vol. 34(10), pp. 1907-1918.
  285. C.S. Poon, A.T.W. Yu and L. Jaillon (2004), “Reducing Building Waste at Construction Sites in Hong Kong”. Construction Management and Economics, Vol. 22, pp. 461-470.
  286. C.S. Poon, Z.H. Shui, and L. Lam (2004), “Effect of Microstructure of ITZ on Compressive Strength of Concrete Prepared With Recycled Aggregates”. Construction and Building Materials, Vol. 18(6), pp. 461-468.
  287. C.S. Poon, Z.H. Shui, L. Lam, H. Fok and S.C. Kou (2004), “Influence of Moisture States of Natural and Recycled Aggregates on the Slump and Compressive Strength of Concrete”. Cement and Concrete Research, Vol. 34(1), pp. 31-36.
  288. Y.F. Fu, Y.L. Wong, C.S. Poon, C.A. Tang and P. Lin (2004), “Experimental Study of Micro/Macro Crack Development and Stress-Strain Relations of Cement-Based Composite Materials at Elevated Temperatures”. Cement and Concrete Research, Vol. 34(5), pp. 789-797.
  289. Y.F. Fu, Y.L. Wong, C.A. Tang, C.S. Poon (2004), “Thermal Induced Stress and Associated Cracking in Cement-based Composite at Elevated Temperature – Part II: Thermal Cracking around Multiple Inclusions”. Cement and Concrete Composites, Vol. 26(2), pp. 113-126.
  290. Y.F. Fu, Y.L. Wong, C.A. Tang, C.S. Poon (2004), “Thermal Induced Stress and Associated Cracking in Cement-based Composite at Elevated Temperature – Part I: Thermal Cracking around Single Inclusion”. Cement and Concrete Composites, Vol. 26(2), pp. 99-111.
  291. Y. Xu, Y.L. Wong, C.S. Poon and M. Anson (2003), “Influence of PFA on Cracking of Concrete and Cement Paste after Exposure to High Temperatures”. Cement and Concrete Research, Vol. 33(12), pp. 2009-2016.
  292. X.C. Qiao, C.S. Poon and Z.S. Lin (2003), “Activation of Rejected Fly Ash Using Flue Gas Desulphurization (FGD) Sludge”. Journal of Wuhan University of Technology-Materials Science Edition, Vol. 18(4), pp. 84-88.
  293. C.S. Poon, X. Qiao and Z.S. Lin (2003), “Pozzolanic Properties of Reject Fly Ash in Blended Cement Pastes”. Cement and Concrete Research, Vol. 33(11), pp. 1857-1865.
  294. C.S. Poon, Ann T.W. Yu and L.H. Ng (2003), “Comparison of Low-Waste Building Technologies Adopted in Public and Private Housing Projects in Hong Kong”. Engineering, Construction and Architectural Management, Vol. 10(2), pp. 88-98.
  295. C.S. Poon, S. Azhar, M. Anson and Y.L. Wong (2003), “Performance of Metakaolin Concrete at Elevated Temperatures”. Cement and Concrete Composites Vol. 25(1), pp. 83-89.
  296. C.S. Poon and S. Azhar (2003), “Deterioration and Recovery of Metakaolin Blended Concrete Subjected to High Temperature”. Fire Technology, Vol. 39(1), pp. 23-34.
  297. C.S. Poon (2003), “Editorial”. Waste Management, Vol. 23(4), pp. iii.
  298. X.D. Li, C.S. Poon, S.C. Lee, S.S. Chung and F. Luk (2003), “Waste Reduction and Recycling Strategies for the In-Flight Services in the Airline Industry”. Resources, Conservation and Recycling, Vol. 37(2), pp. 87-99.
  299. X.C. Qiao, Z.S. Lin, S.C. Kou and C.S. Poon (2003), “Preliminary Study on the Pozzolanic Properties of Rejected Fly Ash”. Journal of Wuhan University of Technology, Vol. 25(8), In Chinese.
  300. C.S. Poon and L. Jaillon (2002), “Minimizing Construction and Demolition Waste at the Design Stage”. The Official Journal of the Hong Kong Institute of Architects, Issue No. 33/3rd Quarter, pp. 50-55.
  301. S.S. Chung, C.W.H. Lo and C.S. Poon (2002), “Factors Affecting Waste Disposal Facilities Siting in Southern China”. Journal of Environmental Assessment Policy and Management, Vol. 4(2), pp. 241-262.
  302. C.S. Poon, S.C. Kou and L. Lam (2002), “Use of Recycled Aggregates in Molded Concrete Bricks and Blocks”. Construction and Building Materials, Vol. 16(5), pp. 281-289.
  303. C.S. Poon, S.C. Kou and L. Lam (2002), “Pore Size Distribution of High Performance Metakaolin Concrete”. Journal of Wuhan University of Technology, Materials Science Edition, Vol. 17(1), pp. 42-46.
  304. Y. Xu, Y.L. Wong, C.S.  Poon and M. Anson (2001), “Impact of High Temperature on PFA Concrete”. Cement and Concrete Research, Vol. 31(7), pp. 1065-1073.
  305. X.D. Li, Y. M. Zhang, C.S. Poon and I.M.C. Lo (2001), “Study of Zinc in Cementitious Material Stabilised/Solidified Wastes by Sequential Chemical Extraction and Microstructural Analysis”. Chemical Speciation and Bioavailability, Vol. 13, pp. 1-7.
  306. C.S Poon, S. Azhar, M. Anson and Y.L. Wong (2001), “Strength and Durability Recovery of Fire-Damaged Concrete after Post-Fire Curing”. Cement and Concrete Research, Vol. 31(9), pp. 1307-1318.
  307. C.S. Poon, S. Azhar, M. Anson and Y.L. Wong (2001), “Comparison of the Strength and Durability Performance of Normal- and High-Strength Pozzolanic Concretes at Elevated Temperatures”. Cement and Concrete Research, Vol. 31(9), pp. 1291-1300.
  308. C.S. Poon, L. Lam, S.C. Kou, Y.L. Wong and R. Wong (2001), “Rate of Pozzolanic Reaction of Metakaolin in High-Performance Cement Pastes”. Cement and Concrete Research, Vol. 31(9), pp. 1301-1306.
  309. C.S. Poon, S.C. Kou, L. Lam and Z.S. Lin (2001), “Activation of Fly Ash/Cement Systems Using Calcium Sulfate Anhydrite CaSO4”. Cement and Concrete Research, Vol. 31(6), pp. 873-881.
  310. C.S. Poon, Ann T.W. Yu and L.H. Ng (2001), “On-Site Sorting of Construction and Demolition Waste in Hong Kong”. Resources, Conservation and Recycling, Vol. 32(2), pp. 157-172.
  311. C.S. Poon, K.W. Lio and C.I. Tang (2001), “A Systematic Study on Cement/PFA Chemical Stabilization/Solidification Process for the Treatment of Heavy Metal Waste”, Waste Management and Research, Vol. 19(4), pp. 276-283.
  312. C.S. Poon, Z.Q. Chen and O. Wai (2001), “The Effect of Flow-Through Leaching on the Diffusivity of Heavy metals in Stabilized/Solidified Wastes”. Journal of Hazardous Materials, Vol. 81(1-2), pp. 179-192.
  313. I.M.L. Lo, C.I. Tang, X.D. Li and C.S. Poon (2001), “Leaching and Microstructural Analysis of Cement-Based Solidified Wastes: Response to comments”. Environmental Science & Technology, Vol. 35 (21), pp. 4395-4395.
  314. X.D. Li, C.S. Poon, H. Sun, I.M.C. Lo and D.W. Kirk (2001), “Heavy Metal Specifications and Leaching Behaviours in Cement Based Solidified/Stabilised Waste Materials”. Journal of Hazardous Materials, Vol. 82(3), pp. 215-230.
  315. X.D. Li, C.S. Poon and P.S. Liu (2001), “Heavy Metal Contamination of Urban Soils and Street Dust in Hong Kong”. Applied Geochemistry, Vol. 16(11-12), pp. 1361-1368.
  316. S.S. Chung and C.S. Poon (2001), “Characterisation of Municipal Solid Waste and its Recyclable Contents of Guangzhou”. Waste Management and Research, Vol. 19, pp. 473-485.
  317. S.S. Chung and C.S. Poon (2001), “A Comparison of Waste Reduction Practices and New Environmental Paradigm of Rural and Urban Chinese Citizens”. Journal of Environmental Management, Vol. 62(1), pp. 3-19.
  318. S.S. Chung and C.S. Poon (2001), “Accounting for the Shortage of Solid Waste Disposal Facilities in Southern China”. Environmental Conservation, Vol. 28(2), pp. 93-103.
  319. C.S. Poon, L. Lam and Y.L. Wong (2000), “A Study on High Strength Concrete Prepared with Large Volumes of Low Calcium Fly Ash”. Cement and Concrete Research Vol. 30(3), pp. 447-455.
  320. I.M.L. Lo, C.I. Tang, X.D. Li and C.S. Poon (2000), “Leaching and Microstructural Analysis of Cement-Based Solidified Wastes”. Environmental Science & Technology, Vol. 34, pp. 5038- 5042.
  321. L. Lam, Y.L. Wong and C.S. Poon (2000), “Degree of Hydration and Gel/Space Ratio of High-Volume Fly Ash/Cement Systems”. Cement and Concrete Research, Vol. 30(5), pp. 747-756.
  322. S.S. Chung and C.S. Poon (2000), “A Comparison of Waste Reduction Practices and the New Environmental Paradigm in Four Southern Chinese Areas”. Environmental Management, Vol. 26(2), pp. 195-206.
  323. Y.L. Wong, L. Lam, C.S. Poon and F.P. Zhou (1999), “Properties of Fly Ash-Modified Cement Mortar-Aggregate Interfaces”. Cement and Concrete Research, Vol. 29(12), pp. 1905-1913.
  324. C.S. Poon, L. Lam and Y.L. Wong (1999), “Effects of Fly Ash and Silica Fume on Interfacial Porosity of Concrete”. Journal of Materials in Civil Engineering, ASCE. Vol. 11(3), pp. 197-205.
  325. C.S. Poon, L. Lam, S.C. Kou and Z.S. Lin (1999), “A Study on the Hydration Rate of Natural Zeolite Blended Cement Pastes”. Construction and Building Materials, Vol. 13(8), pp. 427-432.
  326. C.S. Poon and C.W. Chu (1999), “Planting Grass on Stabilized Chemically Assisted Precipitated Sewage Sludge”. Journal of Toxicological and Environmental Chemistry, Vol. 72, pp. 159-170.
  327. C.S. Poon and C.W. Chu (1999), “The Use of Ferric Chloride and Anionic Polymer in the Chemically Assisted Primary Sedimentation Process”. Chemosphere, Vol. 39(10), pp. 1773-1582.
  328. C.S. Poon, Z.Q. Chen and O. Wai (1999), “A Flow-through Leaching Model for Monolithic Chemically Stabilised/Solidified Hazardous Waste”. Journal of the Air and Waste Management Association, Vol. 49, pp. 569-575.
  329. C.S. Poon and Z.Q. Chen (1999), “Comparison of the Characteristics of Flow-Through and Flow-Around Leaching Tests of Solidified Heavy Metal Wastes”. Chemosphere, Vol. 38(3), pp. 663-680.
  330. S.C. Lee, C.S. Poon, X.D. Li and F. Luk (1999), “Indoor Air Quality Investigation on Commercial Aircraft”. Indoor Air, Vol. 9, pp. 180-187.
  331. P.C. Fung, Q. Huang, S.M. Tsui and C.S. Poon (1999), “Treatability Study of Organic and Colour Removal in Desizing/Dyeing Wastewater by UV/US system Combined with Hydrogen Peroxide”. Water Science and Technology, Vol. 40(1), pp. 153-160.
  332. S.S. Chung and C.S. Poon (1999), “The Attitudes of Guangzhou Citizens on Waste Reduction and Environmental Issues”. Resources, Conservation and Recycling, Vol. 25(1), pp. 35-59.
  333. C.W. Chu and C.S. Poon (1999), “The Feasibility of Planting on Stabilized Sludge-Amended Soil”. Environment International, Vol. 25(4), pp. 465-477.
  334. C.S. Poon, Q. Huang and P.C. Fung (1999), “Degradation Kinetics of Cuprophenyl Yellow RL by UV/H2O2/US Process in Aqueous Solution”. Chemosphere, Vol. 38(5), pp. 1005-1014.
  335. C.S. Poon (1998), “The Influence of Admixtures on the Microstructure and Water Stability of Macro-Defect Free Cement”. Journal of Materials Science Letters, Vol. 17(18), pp. 1593-1595.
  336. S.S. Chung and C.S. Poon (1998), “The Waste Paper and Plastic Recovery Industry of Hong Kong and the Waste Reduction Framework Plan”. Journal of Business and Information System, Vol. 3(1), pp. 137-152.
  337. L. Lam, Y.L. Wong and C.S. Poon (1998), “Effect of Fly Ash and Silica Fume on Compressive and Fracture Behaviors of Concrete”. Cement and Concrete Research, Vol. 28(2), pp. 271-283.
  338. S.S. Chung and C.S. Poon (1998), “Recovery Systems in Guangzhou and Hong Kong”. Resources, Conservation and Recycling, Vol. 23(1-2), pp. 29-45.
  339. S.S. Chung and C.S. Poon (1998), “A Comparison of Waste Management in Guangzhou and Hong Kong”. Resources, Conservation and Recycling, Vol. 22(3-4), pp. 203-216.
  340. C.W. Chu, C.S. Poon and R. Cheung (1998), “Characterization of Raw Sludge, Chemically Modified Sludge and Anaerobically Digested Sludge in Hong Kong”. Water Science and Technology, Vol. 38, pp. 25-32.
  341. M. Boost and C.S. Poon (1998), “The Effect of a Modified Method of Lime-Stabilisation Sewage Treatment on Enteric Pathogens”. Environment International, Vol. 24(7), pp. 783-788. A
  342. C.S. Poon, Y.L. Wong and L. Lam (1997), “The Influence of Different Curing Conditions on the Pore Structure and Related Properties of Fly-Ash Cement Pastes and Mortars”. Construction and Building Materials, Vol. 11(7-8), pp. 383-393.
  343. C.S. Poon and K.W. Lio (1997), “The Limitation of the Toxicity Characteristics Leaching Procedure for Evaluating Cement-Based Stabilised/Solidified Waste Forms”. Waste Management, Vol. 17 (1), pp. 15-23.
  344. C.S. Poon (1997), “Management and Recycling of Demolition Waste in Hong Kong”. Waste Management and Research, Vol. 15(6), pp. 561-572.
  345. S.S. Chung and C.S. Poon (1997), “Quantifying Externalities in Solid Waste Management in Hong Kong”. Journal of Environmental Engineering, ASCE, Vol. 123(3), pp. 282-289.
  346. L.Y. Chan, Y. Qin, S.S. Chung and C.S. Poon (1997), “A Comparison of the Municipal Refuse Compositions and Management Policy in Hong Kong, Guangzhou, Foshan and Beijing”. Environmental Science (in Chinese), Vol. 18(2), pp. 58-61.
  347. C.S. Poon, C.M. Cheung and Y.Q. Xu (1996), “Building Waste Minimisation in Hong Kong Construction Industry”. Journal of Solid Waste Technology and Management, Vol. 23(2), pp. 111-117.
  348. S.S. Chung, C.S. Poon and L.S. Ho (1996), “How Can Waste Recycling and Waste Minimization be Fitted into Hong Kong’s Waste Management System?”. Transactions of Hong Kong Institution of Engineers, Vol. 3(1), pp. 9-16.
  349. C.S. Poon and M. Boost (1996), “The Stabilisation of Sewage Sludge by Pulverized Fuel Ash and Related Materials”. Environmental International, Vol. 22(6), pp. 705-710.
  350. S.S. Chung and C.S. Poon (1996), “The Attitudinal Differences in Source Separation and Waste Reduction between the General Public and Housewives in Hong Kong”. Journal of Environmental Management, Vol. 48(3), pp. 215-227.
  351. S.S. Chung and C.S. Poon (1996), “Evaluating Waste Management Alternatives by the Multiple Criteria Approach”. Resources, Conservation and Recycling, Vol. 17(3), pp. 189-210.
  352. S.S. Chung and C.S. Poon (1994), “An Analysis of Waste Recycling Policy in Hong Kong”. Asia Engineers, pp. 20-24.
  353. S.S. Chung and C.S. Poon (1994), “Recycling Behaviour and Attitude: the Case of Hong Kong People on Commercial and Household Wastes”. International Journal of Sustainable Development and World Ecology, Vol. 1, pp. 130-145.
  354. S.S. Chung and C.S. Poon (1994), “Hong Kong Citizens’ Attitude Towards Waste Recycling and Waste Minimization Measures”. Resources, Conservation and Recycling, Vol. 10(4), pp. 377-400.
  355. S.S. Chung and C.S. Poon (1994), “Waste Recycling Policy in Hong Kong”. Waste Management and Research, Vol. 12(1), pp. 21-32.
  356. C.S. Poon and G.R. Baldwin (1989), “The Influence of Weather on the Corrosion of Steel Reinforcement in Hong Kong”.  Structural Survey, Vol. 8(2), pp. 169-176.
  357. C.S. Poon and G.R. Baldwin (1989), “Corrosion of Steel in Concrete – A Basic Understanding and Research Needs in Hong Kong”.  Hong Kong Engineers, pp. 22-28.
  358. C.S. Poon and G.W. Groves (1988), “Tem Observation of a High-Alumina Cement Paste”.  Journal of Material Science Letters, Vol. 7, pp. 243-244.
  359. C.S. Poon and G.W. Groves (1988), “The Microstructure of Macrodefect Free Cement with Different Polymer Content and the Effect on Water Stability”. Journal of Material Science, Vol. 23, pp. 657-660.
  360. C.S. Poon, L.E. Wassell and G.W. Groves (1987), “Stability of Macro Defect Free Cement”.  Material Science and Technology, Vol. 3, pp. 993-996.
  361. C.S. Poon and G.W. Groves (1987), “The Effect of Latexes on Macro Defect Free Cement”.  Journal of Material Science, Vol. 22, pp. 2148-2152.
  362. C.S. Poon, L.E. Wassell and G.W. Groves (1987), “High Strength Refractory Aluminous Cement”.  Journal of British Ceramic Society, Vol. 86, pp. 58-62.
  363. C.S. Poon, A.I. Clark and R. Perry (1986), “Atomic Structure Analysis of Stabilised Toxic Waste”.  Environmental Technology Letters, Vol. 6, pp. 461-468.
  364. C.S. Poon, A.I. Clark, R. Perry, A.P. Barker and P. Barnes (1986), “Permeability Study on the Cement Based Solidification Process for the Disposal of Hazardous Waste”.  Cement and Concrete Research, Vol. 16(2), pp. 161-172.
  365. C.S. Poon, C.J. Peters, R. Perry, A.P. Barker and P. Barnes (1985), “Mechanisms of Metal Stabilization by Cement Based Fixation Processes”. Science of the Total Environment, Vol. 41(1), pp. 55-71.
  366. C.S. Poon, A.I. Clark, C.J. Peters and R. Perry (1985), “Mechanisms of Metal Fixation and Leaching by Cement Based Fixation Processes”.  Waste Manaagement and Research, Vol. 3(2), pp. 127-142.
  367. C.S. Poon, A.I. Clark and R. Perry (1985), “Investigation of the Physical Properties of Cement Based Fixation Process for the Disposal of Toxic Waste”.  Public Health Engineers, Vol. 13, pp. 108-111.
  368. C.S. Poon, C.J. Peters, R. Perry and C.P.V. Knight (1984), “Assessing the Leaching Characteristics of Stabilised Toxic Waste by Use of Thin Layer Chromatography”.  Environmental Technology Letters, Vol. 5(1), pp. 1-6.
  369. C. S. Poon, C.J. Peters and R. Perry (1983), “Use of Stabilisation Processes in the Control of Toxic Waste”.  Effluent and Water Treatment Journal, Vol. 23(11), pp. 451-459.a